Manufacturers & Suppliers of Flanges, Pipe Fittings & Tube Fittings

Threaded Union

  • Home
  • Threaded Fittings

Threaded Union Supplier, Ready Stock Of ANSI B16.11 Forged Threaded Union, Manufacturer of SS Threaded Union, Nickel Alloy 200 Screwed Union, Screwed Forged Union, Forged Threaded Union in Mumbai.

Unifit Metal Alloys is a supplier of Threaded Union Fittings, whichare stabilised with columbium and tantalum, and their cobalt and tantalum concentration is limited for nuclear uses. In the annealed state, Duplex Steel Threaded Union Fittings is essentially non-magnetic and can only be hardened by cold working. This product has strong oxidation resistance, on par with most other austenitic alloys, and it contains greater carbon allowing for superior high temperature creep characteristics. It is commonly used in soaring temperature expansion and gaskets joints, aircraft collector rings,rocket engine parts, exhaust manifolds and chemical manufacturing parts. Most resistance and fusion procedures may be used to weld it, albeit oxyacetylene welding is not recommended for this steel. They have greater resistance to creep and stress rupture corrosions in addition to their heat resistant qualities.

Monel 400 Threaded Union, Threaded Union, Duplex Steel Forged Screwed Union Fittings, ANSI B16.9 Forged Screwed Union, SS Threaded Union Fittings, ANSI B16.11 Forged Screwed Union, Threaded Union Fittings, Forged Union 3000LB Threaded, Alloy Steel Threaded Union Manufacturer In Mumbai, India.

Super Duplex Steel Threaded Union Fittings have increased creep and stress rupture qualities, which should be evaluated for exposures including sensitization and inter-granular corrosion. Columbium-tantalum carbides precipitate within the grains rather than at the grain borders in this product. Because columbium-tantalum carbides have a higher affinity for carbon than chromium, they precipitate within the grains rather than at the grain borders. It is very resilient to corrosion at temperatures as high and elevated as 1904 Degree F in intermittent usage and 2102 Degree F in continuous service.

Although heat treatment cannot toughen this Stainless Steel Threaded Union Fittings, cold reduction can enhance it. Because of its peculiar properties, this steel is used in a wide range of applications in many of today's critical sectors. It is used in the oil, gas, and chemical sectors, as well as in nuclear power plants. They are still employed for long-term operation in temperatures ranging from 800 degrees F to 1500 degrees F (427 degrees C to 816 degrees C). It may be used for forging, upsetting, and other hot work operations at temperatures ranging from 1149° C to 1232° C (2100° C to 2250° F). This steel's properties may be better suited for locations where stability is a main issue.

Threaded Union

Get a best quote for SS Threaded Union, We Keep Bulk Stock of Male Screwed Union at our stockyard, contact us to request a quote.

Threaded Union Specifications

Standards ASTM A182, ASTM SA182.
Dimension ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799.
Size 1/4" NB TO 4" NB.
Type Screwed-Threaded NPT, BSP, BSPT Fittings.
Class 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Form Union, Union Male / Female.
Application Industries In bridges and other structural steel works, Automobile industry, Agriculture equipment, Pylons and other architectural structures, Offshore industries, Transportation equipment, Spiral Cases and penstocks in power plants

Material Grades of Threaded Union

Stainless Steel Forged Threaded Union ASTM A182 F304, F304L, F306, F316L, F304H, F309S, F309H, F310S, F310H, F316TI, F316H, F316LN, F317, F317L, F321, F321H, F11, F22, F91, F347, F347H, F454L, ASTM A312/A403 TP304, TP304L, TP316, TP316L.
Alloy Steel Forged Threaded Union ASTM / ASME A 182, ASTM / ASME A 335 GR P 1, P 5, P 9, P 11, P 12, P 22, P 23, P 91, ASTM / ASME A 691 GR 1 CR, 1 1/4 CR, 2 1/4 CR, 5 CR, 9CR, 91.
Duplex & Super Duplex Steel Forged Threaded Union ASTM A182 – F51, F53, F55 S31803, S32205, S32550, S32750, S32760, S32950.
Carbon Steel Forged Threaded Union ASTM/ ASME A 105, ASTM/ ASME A 350 LF 2, ASTM / ASME A 53 GR. A & B, ASTM A 106 GR. A, B & C. API 5L GR. B, API 5L X 42, X 46, X 52, X 60, X 65 & X 70. ASTM / ASME A 691 GR A, B & C.
Nickel Alloy Forged Threaded Union ASTM / ASME SB 336, ASTM / ASME SB 564 / 160 / 163 / 472, UNS 2200 (NICKEL 200) , UNS 2201 (NICKEL 201 ) , UNS 4400 (MONEL 400 ) , UNS 8020 ( ALLOY 20 / 20 CB 3 ) , UNS 8825 INCONEL (825) , UNS 6600 (INCONEL 600 ) , UNS 6601 (INCONEL 601) , UNS 6625 (INCONEL 625) , UNS 10276 (HASTELLOY C 276)
Copper Alloy Steel Forged Threaded Union ASTM / ASME SB 111 UNS NO. C 10100 , C 10200 , C 10300 , C 10800 , C 12000, C 12200, C 70600 C 71500, ASTM / ASME SB 466 UNS NO. C 70600 ( CU -NI- 90/10) , C 71500 ( CU -NI- 70/30).

Dimensions Of Threaded Union

DIMENSIONS OF THREADED UNION (BS3799) (in mm)
Nom. Pipe Size Pipe End Min Socket Bore Dia. Socket Wall Min. Water Way Bore Laying Length Male Flange Min. Nut Min. Threads Per 25.4 Max Bearing Min. Depth of Socket Min. Length Assem. Nominal Clear Assem. Nut
  A B C D E F G H J K L N
1/8 21.8 10.92
10.67
3.17 6.83
6.43
22.4
19.0
3.17 3.17 16 1.24 9.6 41.1 49.0
¼ 21.8 14.22
13.97
3.30 9.85
9.45
22.4
19.0
3.17 3.17 19 1.24 9.6 41.4 49.0
3/8 25.9 17.78
17.53
3.48 13.92
13.51
26.9
20.6
3.43 3.43 14 1.37 9.6 46.0 55.0
½ 31.2 21.84
21.59
4.06 17.47
17.07
26.9
20.6
3.68 3.68 14 1.50 9.6 49.0 57.0
¾ 37.1 27.18
26.92
4.27 21.79
21.39
31.8
25.4
4.06 4.06 11 1.68 12.7 56.9 67.0
1 45.5 34.04
33.78
4.95 28.14
27.74
34.3
26.2
4.57 4.44 11 1.85 12.7 62.0 79.0
11/4 54.9 42.67
42.42
5.28 35.76
35.36
40.6
32.5
5.33 5.21 11 2.13 12.7 71.1 94.0
11/2 61.5 48.77
48.51
5.54 41.61
41.20
42.2
34.0
5.84 5.59 10 2.31 12.7 75.5 111.0
2 75.2 61.47
61.21
6.05 52.53
52.12
45.3
37.3
6.60 6.35 10 2.69 15.8 86.1 132.0
21/2 91.7 74.17
73.66
7.65 64.72
64.31
61.7
52.1
7.49 7.11 8 3.07 15.8 102.4 148.0
3 109.2 90.17
89.66
8.31 77.67
77.27
63.8
53.6
8.25 8.00 8 3.53 15.8 109.0 175.0

You need our support, to have any projects?

Ready Stock of Threaded Union

  • Hastelloy C22 Forged Screwed Unions
  • ASTM A182 Threaded Stainless Steel Union
  • High Quality Threaded Union
  • Forged Union 3000LB Threaded
  • BS 3799 Forged Screwed Union
  • Stainless Steel Screwed Union
  • Titanium Forged Threaded Union
  • Hastelloy C276 Forged Screwed Unions
  • Super Duplex Steel Threaded Union
  • High Nickel Alloy Forged Threaded Union
  • Inconel Threaded Union
  • ASTM A182 SS Threaded Union
  • SS Forged Threaded Union

  • High Nickel Alloy Forged Threaded Union
  • Copper Nickel Threaded Union Supplier
  • ASME B16.11 Threaded Union Stockist
  • 150 lb. Threaded Union
  • Duplex Steel Screwed Union
  • Carbon Steel Threaded Union
  • Inconel Threaded Pipe Union
  • Threaded Forged Union
  • MSS SP-79 and MSS SP-83 Threaded Unions
  • 150 lb. Threaded Fittings Pipe Union
  • ASME B16.11 Forged Threaded Union
  • BS3799 Screwed Forged Union
  • Forged Threaded Union

Threaded Union Application Industries

Application Industries

Refineries

90%

Oil and Gas Industry

96%

Power Generation

80%

Pharmaceutical Equipment

85%

Pulp & Paper Industry

88%