Manufacturers & Suppliers of Flanges, Pipe Fittings & Tube Fittings

Threaded Tee

  • Home
  • Threaded Fittings

Forged Threaded Tee 45 Degree, Ready Stock Of ANSI B16.11 Forged Threaded Tee, Forged Threaded Unequal Tee, BS3799 Screwed Forged Screwed Unequal Tee, Forged Threaded Unequal Tee, Manufacturer of SS Threaded Reducing Tee, ASME B16.9 45 deg Threaded Tee Supplier in Mumbai.

Unifit Metal Alloys is a supplier of Threaded Tee Fittings, whichare a lower carbon variant that also provides users with a variety of advantages. Nickel Alloy Threaded Tee Fittings has good oxidation protection under slightly cyclic circumstances up to 2000 degrees F. For widths of this product greater than 12mm, a double-weld should be used instead of a single-V butt weld, because the included angle should be 60 Degree - 70 Degree, whereas when using MIG-welding, about 50 Degree is sufficient. Because of its durability and limited magnetic permeability, it is frequently used in cryogenic uses. Kilns, heat exchangers, radiant tubes, muffles, retorts, annealing covers, tube racks for petroleum refining and steam boilers, coal gratifier interior components, and other applications are typical.

Duplex Steel Forged Screwed Equal Tee Fittings, 45 Degree Tee 3000LB Threaded, Threaded Fittings 45° Tee, Threaded Lateral Tee, Alloy Steel 45 Degree Forged Threaded Pipe Tee, Nickel Alloy 200 45 Degree Screwed Tee, ANSI B16.9 Forged Threaded Reducing Tee, SS Threaded Unequal Tee Fittings, ASME B16.11 Screwed Equal Tee, Monel Threaded Equal Tee Manufacturer In Mumbai, India.

Titanium Alloy Threaded Tee Fittings cannot be toughened by thermal treatment and can only be hardened by cold work, which is rarely done. This steel is resistant to suffixation and other types of hot corrosion due to its high chromium and middling nickel concentration. It is known for its ability to endure high temperature applications. Its fragments are stringy, and it will harden quickly due to the need to maintain the instrument cutting at all times and use chip breakers. Weld seam build-up should be avoided because they must be attached with comparatively shorter distances between each other (significantly shorter than non-alloyed steels) to prevent powerful deformation, shrinkage, or flaking tack welds.

Alloy 20 Threaded Tee Fittings retains very excellent corrosion resistance in these high temperature settings, as well as extraordinary resistance to oxidising and carburizing atmospheres and other types of hot corrosion, up to a maximum dry air service temperature of 1100 degrees Celsius. This steel has great resilience to normal temperatures as well as oxidising and carburizing atmospheres. It is especially noticeable in salt settings for pitting and crevice rusting. The high chromium content, which is meant to improve high temperature qualities, also provides strong aqueous corrosion resistance to these products. They have significant chromium content and provide exceptional corrosion protection in aqueous environments.

Threaded Tee

Get a best quote for SS 45 Deg Screwed Tee, We Keep Bulk Stock of SS Threaded Reducing Tee at our stockyard, contact us to request a quote.

Threaded Tee Specifications

Standards ASTM A182, ASTM SA182.
Dimension ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799.
Size 1/4" NB TO 4" NB.
Type Screwed-Threaded NPT, BSP, BSPT Fittings
Form Reducing Tee, Unequal Tee, Equal Tee, Forged Tee, Cross Tee.
Class 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS.
Application Industries In bridges and other structural steel works, Automobile industry, Agriculture equipment, Pylons and other architectural structures, Offshore industries, Transportation equipment, Spiral Cases and penstocks in power plants

Material Grades of Threaded Tee

Stainless Steel Forged Equal & Unequal Tee ASTM A182, ASTM / ASME SA 358, ASTM / ASME SA 312 GR. TP 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L.
Alloy Steel Forged Tee ASTM / ASME A 182, ASTM / ASME A 335 GR P 1, P 5, P 9, P 11, P 12, P 22, P 23, P 91, ASTM / ASME A 691 GR 1 CR, 1 1/4 CR, 2 1/4 CR, 5 CR, 9CR, 91.
Duplex & Super Duplex Steel Forged Tee ASTM A182 – F51, F53, F55 S31803, S32205, S32550, S32750, S32760, S32950.
Carbon Steel Forged Equal & Unequal Tee ASTM/ ASME A 105, ASTM/ ASME A 350 LF 2, ASTM / ASME A 53 GR. A & B, ASTM A 106 GR. A, B & C. API 5L GR. B, API 5L X 42, X 46, X 52, X 60, X 65 & X 70. ASTM / ASME A 691 GR A, B & C.
Nickel Alloy Forged Tee ASTM / ASME SB 564 UNS 10276 (HASTELLOY C 276 Forged Tee ), UNS 2200 (NICKEL 200 Forged Tee ), UNS 2201 (NICKEL 201 Forged Tee ), UNS 4400 (MONEL 400 Forged Tee), UNS 8020 (ALLOY 20 Forged Tee ), UNS 8825 INCONEL 825 Forged Tee ), UNS 6600 (INCONEL 600 Forged Tee ), UNS 6601 (INCONEL 601 Forged Tee ), UNS 6625 (INCONEL 625 Forged Tee)
Copper Alloy Forged Equal & Unequal Tee ASTM / ASME SB 61 / 62 / 151 / 152. C 70600 (CU -NI- 90/10) – Cupro Nickel, C 71500 (CU -NI- 70/30) – Copper Nickel, UNS NO. C 92200, UNS NO. C 83600, UNS NO C 10100, C 10200, C 10300, C 10800, C 12000, C 12200.

Dimensions Of Threaded Tee

Threaded Tee Dimensions, 3/4 Threaded Tee Dimensions NPS 1/2 to 4 Class 2000
NPS Min Length of Thread Outside Dia of Band
D
Center to End
A
Min
WT
B J
1/2 10.9 13.6 33 28 3.18
3/4 12.7 13.9 38 33 3.18
1 14.7 17.3 46 38 3.68
1.1/4 17 18 56 44 3.89
1.1/2 17.8 18.4 62 51 4.01
2 19 19.2 75 60 4.27
2.1/2 23.6 28.9 92 76 5.61
3 25.9 30.5 109 86 5.99
4 27.7 33 146 106 6.55
Threaded Equal Tee Class 3000 Dimensions NPS 1/2 to 4
NPS Min Length of Thread Outside Dia of Band
D
Center to End
A
Min
WT
B J
1/2 10.9 13.6 38 33 4.09
3/4 12.7 13.9 46 38 4.32
1 14.7 17.3 56 44 4.98
1.1/4 17 18 62 51 5.28
1.1/2 17.8 18.4 75 60 5.56
2 19 19.2 84 64 7.14
2.1/2 23.6 28.9 102 83 7.65
3 25.9 30.5 121 95 8.84
4 27.7 33 152 114 11.18
Threaded Tee Class 6000 Dimensions NPS 1/2 to 4
NPS Min Length of Thread Outside Dia of Band
D
Center to End
A
Min
WT
B J
1/2 10.9 13.6 46 38 8.15
3/4 12.7 13.9 56 44 8.53
1 14.7 17.3 62 51 9.93
1.1/4 17 18 75 60 10.59
1.1/2 17.8 18.4 84 64 11.07
2 19 19.2 102 83 12.09
2.1/2 23.6 28.9 121 95 15.29
3 25.9 30.5 146 106 16.64
4 27.7 33 152 114 18.67

You need our support, to have any projects?

Ready Stock of Threaded Tee

  • Stainless Steel Screwed Unequal Tee
  • SS Forged Threaded Unequal Tee
  • Forged Threaded Reducing Tee
  • Hastelloy Threaded Unequal Tee
  • ANSI B16.11 Forged Threaded Unequal Tee
  • Forged Unequal Tee 3000LB Threaded
  • Inconel Threaded Unequal Tee
  • BS 3799 Forged Screwed Unequal Tee
  • Super Duplex Steel Threaded Unequal Tee
  • High Nickel Alloy Forged Threaded Reducing Tee
  • High Quality Threaded Unequal Tee
  • Carbon Steel Threaded Unequal Tee
  • Titanium Forged Threaded Unequal Tee
  • ASTM A182 Threaded Stainless Steel Unequal Tee
  • Threaded Forged Unequal Tee

  • SS 45 Deg. Forged Screwed Tees
  • ASME B16.11 45 deg Threaded Tee Stockist
  • Forged Threaded Tee 45 Degree
  • Forged Threaded Long Radius 45 Degree Tees
  • Threaded Forged Unequal Tee
  • Duplex Steel Screwed Unequal Tee
  • Copper Nickel Threaded Unequal Tee Supplier
  • High Quality Threaded 45° Tee
  • Titanium 45 Degree Threaded Tee
  • Forged Threaded Unequal Tee
  • Forged Threaded Reducing Tee
  • BS 3799 Forged 45 Degree Tee
  • Inconel Threaded 45 Deg Pipe Tee
  • ASME B16.11 Forged Threaded Unequal Tee
  • 150 lb. Threaded Fittings Unequal Tee

Threaded Tee Application Industries

Application Industries

Refineries

90%

Oil and Gas Industry

96%

Power Generation

80%

Pharmaceutical Equipment

85%

Pulp & Paper Industry

88%