Manufacturers & Suppliers of Flanges, Pipe Fittings & Tube Fittings

Threaded Elbow

  • Home
  • Threaded Fittings

Threaded Long Radius 90 Degree Elbows, High Quality 45° Screwed Elbow, Alloy 90 Degree Forged Threaded Pipe Elbow, Inconel 45 Deg. Elbow, Manufacturer of Screwed Fittings 45° Elbow, Ready Stock Of ANSI B16.9 90 Deg Threaded Elbow, Stainless Steel 90 deg Threaded Elbow Supplier in Mumbai.

Unifit Metal Alloys is a supplier of Threaded Elbow Fittings, whichhas a much greater rate of thermal expansion than unalloyed steels. Titanium Alloy Threaded Elbow Fittings has oxidation resistance to 2000 degrees Fahrenheit, heated corrosion resistance, moderate strength at high temperatures, strength and durability at cryogenic temperatures, and other properties. It is also found in furnaces, oil burners, heat exchangers, weld filler wire and electrodes, cryogenics, kilns, food preparation machinery, and other applications. It is the alloy's low carbon variant, and it is used for simplicity of fabrication. Greater distortion in this product is to be anticipated as a result of lower heat conductivity. They offer better corrosion and heat protection in even the most challenging settings.

Nickel Alloy 200 90 Degree Threaded Elbow, ASTM A182 SS 45 Deg Screwed Elbows, Hastelloy 90 Degree Threaded Elbow, Threaded Fittings 90° Elbow, Alloy 20 45° Elbow Screwed, Forged Threaded 45 Deg. Elbow, Titanium 90 Deg. Forged Threaded Elbow, MSS SP-79 and MSS SP-83 Threaded 90 Deg. Elbow, 90 Degree Elbow 3000LB Threaded Manufacturer In Mumbai, India.

Duplex Steel Threaded Elbow Fittings is commonly used in oven linings, boiler barriers, furnaces, lead pots, radiant tubes, annealing covers, staggers, burners, and combustion tubes, among other applications. All methods that work against this distortion (e.g., back-step sequence welding, welding successively on opposing sides with double-V butt weld, appointment of two welders when the components are appropriately big) must be strictly followed when welding this steel. This steel is also used in flame tips, fluidized bed coal combustors, radiant tubes, tube hangers for petroleum refining and steam boilers, internal components of coal gasoliers, thermo wells and refractory anchor bolts, burners, combustion chambers, retorts, muffles, annealing covers, cryogenic structures, and other applications.

Super Duplex Steel Threaded Elbow Fittings is also used in Coal Gossipier Components, Flare Tips, Furnace Components, Food Processing Equipment, Bricking Plates, Cement Kiln Components, and other similar applications. Other heat-resistant alloys should be chosen for harsher carburising atmospheres, as this steel is not suggested for regular liquid quenching due to thermal shock. A solution annealing process at 2012 Degree F - 2102 Degree F (1100 Degree C - 1150 Degree C) will return some toughness to this steel.This material is used to make refractory anchor fasteners, fire box sheets, furnace components, and other high-temperature vessels.It has good corrosion protection at normal temperatures but is mainly intended for high-temperature performance.

Threaded Elbows

Get a best quote for SS 45 Deg Screwed Elbows, We Keep Bulk Stock of Threaded 90° Elbow Fittings at our stockyard, contact us to request a quote.

Threaded Elbow Specifications

Standards ASTM A182, ASTM SA182.
Dimension ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799.
Size 1/4" NB TO 4" NB.
Type Screwed-Threaded NPT, BSP, BSPT Fittings
Form 45 Deg Elbow, 90 Deg Elbow, Forged Elbow, Threaded Elbow, Screwed Elbow.
Class 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS.
Application Industries In bridges and other structural steel works, Automobile industry, Agriculture equipment, Pylons and other architectural structures, Offshore industries, Transportation equipment, Spiral Cases and penstocks in power plants

Material Grades of Threaded Elbow

Stainless Steel Threaded Elbow ASTM A182 F304, F304L, F306, F316L, F304H, F309S, F309H, F310S, F310H, F316TI, F316H, F316LN, F317, F317L, F321, F321H, F11, F22, F91, F347, F347H, F904L, ASTM A312/A403 TP304, TP304L, TP316, TP316L.
Carbon Steel Threaded Elbow ASTM/ ASME A 105, ASTM/ ASME A 350 LF 2, ASTM / ASME A 53 GR. A & B, ASTM A 106 GR. A, B & C. API 5L GR. B, API 5L X 42, X 46, X 52, X 60, X 65 & X 70. ASTM / ASME A 691 GR A, B & C.
Alloy Steel Threaded Elbow ASTM / ASME A 182, ASTM / ASME A 335, ASTM / ASME A 234 GR P 1, P 5, P 9, P 11, P 12, P 22, P 23, P 91, ASTM / ASME A 691 GR 1 CR, 1 1/4 CR, 2 1/4 CR, 5 CR, 9CR, 91.
Copper Nickel Threaded Elbow ASTM / ASME SB 111 UNS NO. C 10100 , C 10200 , C 10300 , C 10800 , C 12000, C 12200, C 70600 C 71500, ASTM / ASME SB 466 UNS NO. C 70600 ( CU -NI- 90/10) , C 71500 ( CU -NI- 70/30).
Duplex & Super Duplex Steel Threaded Elbow ASTM A 182 – F 51, F53, F55 S31803, S32205, S32550, S32750, S32760, S32950.
Nickel Alloy Threaded Elbow ASTM / ASME SB 564 UNS 2200 (NICKEL 200) , UNS 2201 (NICKEL 201 ) , UNS 4400 (MONEL 400 ) , UNS 8020 ( ALLOY 20 / 20 CB 3 ) , UNS 8825 INCONEL (825) , UNS 6600 (INCONEL 600 ) , UNS 6601 (INCONEL 601) , UNS 6625 (INCONEL 625) , UNS 10276 (HASTELLOY C 276).

Dimensions Of Threaded Elbow

Check 90 Degree Threaded Elbow Dimensions

Class 2000
Nominal
Pipe
Size
1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
A 7/8 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 3 3 3/8 4 3/16
B 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/16 4 5/16 5 3/4
Wt 0.198 0.283 0.500 0.773 1.013 1.550 2.180 3.140 6.500 10.925 26.675
 
Class 3000 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
A 7/8 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 2 1/2 3 1/4 3 3/4 4 1/2
B 29/32 1 1/16 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 4 4 3/4 6
Wt 0.236 0.350 0.592 0.973 1.355 2.265 2.407 3.500 5.920 11.900 14.438 31.975
 
Class 6000 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
A 31/32 1 1/8 1 5/16 1 1/2 1 3/4 2 2 3/8 2 1/2 3 1/4 3 3/4 4 3/16 4 1/2
B 1 1/6 1 5/16 1 9/16 1 27/32 2 7/32 2 1/2 3 1/32 3 11/32 4 4 3/4 5 3/4 6
Wt 0.250 0.625 1.023 1.625 2.625 3.500 6.750 7.500 13.438 20.875 39.050 38.000
90 Degree Threaded Elbow Class 2000 Dimensions NPS 1/2 to 4
NPS Min Length
of Thread
Outside Dia
of Band
Min
WT
Center to End
B J D G 90°
A
45°
C
1/2 10.9 13.6 33 3.18 28 22
3/4 12.7 13.9 38 3.18 33 25
1 14.7 17.3 46 3.68 38 28
1.1/4 17 18 56 3.89 44 33
1.1/2 17.8 18.4 62 4.01 51 35
2 19 19.2 75 4.27 60 43
2.1/2 23.6 28.9 92 5.61 76 52
3 25.9 30.5 109 5.99 86 64
4 27.7 33 146 6.55 106 79
90 Degree Threaded Elbow Class 3000 Dimensions NPS 1/2 to 4
NPS Min Length
of Thread
Outside Dia
of Band
Min
WT
Center to End
B J D G 90°
A
45°
C
1/2 10.9 13.6 38 4.09 33 25
3/4 12.7 13.9 46 4.32 38 28
1 14.7 17.3 56 4.98 44 33
1.1/4 17 18 62 5.28 51 35
1.1/2 17.8 18.4 75 5.56 60 43
2 19 19.2 84 7.14 64 44
2.1/2 23.6 28.9 102 7.65 83 52
3 25.9 30.5 121 8.84 95 64
4 27.7 33 152 11.18 114 79
Threaded Male & Female 90 Degree Elbow Dimensions NPS 1/2 to 4
NPS Min Length
of Thread
Outside Dia
of Band
Min
WT
Center to End
B J D G 90°
A
45°
C
1/2 10.9 13.6 46 8.15 38 28
3/4 12.7 13.9 56 8.53 44 33
1 14.7 17.3 62 9.93 51 35
1.1/4 17 18 75 10.59 60 43
1.1/2 17.8 18.4 84 11.07 64 44
2 19 19.2 102 12.09 83 52
2.1/2 23.6 28.9 121 15.29 95 64
3 25.9 30.5 146 16.64 106 79
4 27.7 33 152 18.67 114 79

You need our support, to have any projects?

Ready Stock of Threaded Elbow

  • High Nickel Alloy 45° Forged Threaded Elbow
  • Super Duplex Steel 45 Deg Screwed Elbow
  • High Nickel Alloy 90° Threaded Elbow
  • Titanium 90 Degree Threaded Elbow
  • ANSI B16.11 90 Degree Screwed Elbow
  • Forged Threaded Long Radius 45 Degree Elbows
  • Forged Threaded Elbow 45 Degree
  • 150 lb. Threaded Fittings Pipe Elbow
  • Copper Nickel Threaded 45 Deg Elbow
  • Hastelloy Threaded 45° Pipe Elbow
  • Threaded 45° Short Radius Elbow
  • Stainless Steel 90 Degree Screwed Pipe Elbow
  • Carbon Steel Threaded 90 Deg.Elbow

  • Threaded Long Radius 90 Degree Elbows
  • Threaded 90° Short Radius Elbow
  • Threaded 90° Pipe Elbow
  • SS 45 Degree Screwed Pipe Elbow
  • Duplex Steel 90° Screwed Pipe Elbow
  • Copper Nickel Threaded 90 Deg Elbow Supplier
  • ASME B16.11 90 deg Threaded Elbow
  • Forged Threaded Long Radius 90 Degree Elbows
  • Super Duplex Steel 90 Deg Screwed Elbow
  • High Quality Threaded 90° Elbow
  • Threaded 90° Short Radius Elbow
  • Inconel Threaded 45 Deg Pipe Elbow
  • 90 Degree Elbow 3000LB Threaded Stockist

Threaded Elbow Application Industries

Application Industries

Refineries

90%

Oil and Gas Industry

96%

Power Generation

80%

Pharmaceutical Equipment

85%

Pulp & Paper Industry

88%