Manufacturers & Suppliers of Flanges, Pipe Fittings & Tube Fittings

Alloy 20 Round Bar

  • Home
  • Alloy Round Bar

Alloy 20 Round Bar, Ready Stock Of Grade 20 Alloy Hollow Bars, Manufacturer of ASTM B473 Gr 20 Bright Bar, Carpenter 20 Square Bar, Incoloy® Alloy 20 Bars Supplier in Mumbai.

Unifit Metal Alloys is Supplier of Alloy 20 Bars, which processes similarly to other varieties, producing tough, stringy chips with maximal feeds and moderate speeds for the optimum mach inability. After homogeneous heating to 2150° F(1177 Degree C), most conventional hot work procedures may be effectively applied to this WNR 2.4660 Square Bars. Because forming processes should be completed at room temperature if feasible, this amounts to around 70 surface feet per minute when employing high speed steel tooling for such a product. Copper back-up plates for quicker heat rejection are functional; however surface-fusing the copper back-up plate is not permitted to avoid fractures in the solder metal.Its maximum dry air service temperature is 1100 degrees Celsius.

Incoloy® Alloy 20 Flat Bar, Alloy 20 Threaded Bar, UNS N08020 Forged Bar, DIN 2.4660 Hot Rolled Bar, Carpenter 20Cb-3® Hex Bar, Grade 20 Alloy Rectangular Bar, Alloy EN NiCr20CuMo Hollow Bars, ANSI B16.9 Gr 20 Alloy Round Bar Manufacturer In Mumbai, India.

UNS N08020 Flat Bars is widely used in all high-temperature situations that demand scaling and corrosion resistance, as well as high-temperature strength and creep resistance. They are widely regarded among our clientele for their long lasting life and resilience to wear and strain. It is steel with low carbon content. Most welding processes are suitable for it, albeit oxyacetylene welding is not suggested due to the possibility of carbon pick up in the weld region. For this steel, do not forge below 1800 degrees Fahrenheit (982 degrees Celsius), since quick cooling is essential to enhance corrosion resistance. It is frequently used in power reactors, thermal treatment, and food processing.

Alloy 20Cb3 Threaded Bars is resistant to oxidation up to 2000 degrees Fahrenheit, has moderate strength at high temperatures, is resistant to hot corrosion, and has strength and toughness at cryogenic temperatures. It has a far higher coefficient of thermal expansion than non-alloyed steels because, with lower thermal conductivity, more deformation is to be expected.Because of the high chromium and nickel content, the steel has great oxidation resistance and strong strength at high temperatures. This alloy's high chromium and nickel concentrations give similar corrosion resistance, higher oxidation resistance, and the retention of a larger proportion of room temperature strength than conventional austenitic alloys.

Alloy 20 Round Bar

Get a best quote for Alloy 20 Round Bar, We Keep Bulk Stock of Carpenter 20 Hexagon Bar at our stockyard, contact us to request a quote.

Alloy 20 Round Bar Specifications

Monel 400 Bar Standard ASTM B473, ASTM B865, AMS 5513, AMS 5511, AMS 5647
Monel K500 Bar Dimensions EN, DIN, JIS, ASTM, BS, ASME, AISI
Monel 400 Round bar size Diameter: 3-~800mm
Monel K500 Hex Bar size 2-100mm A/F
Monel Alloy 400 Flat bar size Thickness: 2 -100mm
Width: 10 to 500mm
Monel K500 Square bar size 4 to 100mm
Alloy 400 Angle bar size 3mm*20mm*20mm~12mm*100mm*100mm
Alloy K500 Rectangular Bars Section 3.0 to 12.0mm thickness
Monel 400 Channel Bar 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness
ASTM B473 Type K500 Hollow Bar 32mm OD x 16mm ID to 250mm OD x 200mm ID)
Monel Alloy 400 Threaded Bar Billet Size 1/2 to 495mm Diameter
Monel K500 Rectangular Size 33 x 30mm to 295 x 1066mm
400 Alloy Hex Bars Finish Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black
ASTM B473 Type K500 Hollow Bar Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
JIS NW 4400 T-Bar Surface Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline
Rolled Monel K500 Flat Bars Condition Hardened & tempered, annealed
ASTM B473 Type 400 Cold Rolled Bar Technique K500 Alloy Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod
Monel Alloy 400 Rod Processing Bar cutting to 650mm
400 Alloy Rounds Bar Form Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc.
Our K500 Monel Round bar conforms to NACE MR0175/ISO 15156

Alloy 20 Round Bars Equivalent Grades

STANDARD WERKSTOFF NR. UNS GOST AFNOR JIS BS OR EN
Alloy 20 2.4660 N08020 - Z2NCUD31-20AZ - - - NiCr20CuMo

Alloy 20 Round Bar Chemical Composition

Grade Ni Fe Cr Cu Mo Nb C Mn P S Si
Alloy 20 32 – 38 Bal 19 – 21 3 – 4 2 – 3 0.1 – 0.3 0.02 max 1 – 2 0.02 max 0.005 max 0.7 max

Alloy 20 Round Bar Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.1 g/cm3 1443 °C (2430 °F) Psi – 80000 , MPa – 551 Psi – 35000 , MPa – 241 30 %

Various Types Of Alloy 20 Round Bar

Alloy 20 Round Bars

Alloy 20 Round Bars

DIN 2.4660 Round Bars Grade 20 Alloy Round Bars UNS N08020 Round Bars ANSI B16.9 20 Alloy Round Bars
Alloy 20 Flat Bars

Alloy 20 Flat Bar

Carpenter 20 Flat Bar DIN 2.4660 Flat Bar ANSI B16.9 Grade 20 Alloy Flat Bar UNS N08020 Flat Bar
Alloy 20 Hexagone Bars

Alloy 20 Hexagone Bars

DIN 2.4660 Hexagone Bars Incoloy® Alloy 20 Hexagone Bars UNS N08020 Hexagone Bars ANSI B16.9 Alloy 20 Hexagone Bars
Alloy 20 Threaded Rods

Alloy 20 Threaded Rods

DIN 2.4660 Threaded Rods Alloy 20CB-3® Threaded Rods UNS N08020 Threaded Rods ANSI B16.9 Incoloy® Alloy 20 Threaded Rods
Alloy 20 Matt Finish Round Bars

Alloy 20 Matt Finish Round Bars

Alloy EN NiCr20CuMo Matt Finish Round Bars DIN 2.4660 Matt Finish Round Bars ANSI B16.9 Gr 20 Alloy Matt Finish Round Bars UNS N08020 Matt Finish Round Bars
Alloy 20 Hollow Bar

Alloy 20 Hollow Bar

Alloy 20cb3 Hollow Bar DIN 2.4660 Hollow Bar ANSI B16.9 Grade 20 Hollow Bar UNS N08020 Hollow Bar
Alloy 20 T-Bar

Alloy 20 T-Bar

DIN 2.4660 T-Bar Carpenter 20Cb-3® T-Bar UNS N08020 T-Bar ANSI B16.9 Gr 20 T-Bar
Alloy 20 Triangle Bar

Alloy 20 Triangle Bar

DIN 2.4660 Triangle Bar Alloy AFNOR Z2NCUD31-20AZ Triangle Bar UNS N08020 Triangle Bar ANSI B16.9 Alloy 20 Triangle Bar

Alloy 20 Round Bar Standards

Standard Description
ASTM B473 Specification for Alloy 20 Bars and Shapes
ASTM A314 Specification for Alloy 20 Billets and Bars for Forging
ASTM A493 Specification for Alloy 20 Wire and Wire Rods for Cold Heading and Cold Forging
ASTM A564 Specification for Hot-Rolled And Cold-Finished Age-Hardening Alloy 20 Bars and Shapes
ASTM A565 Specification for Martensitic Alloy 20 Bars, Forgings, and Forging Stock for High Temperature Service
ASTM A582 Specification for Free Machining Alloy 20 Bars
ASTM A666 Specification For Annealed or Cold-Worked Austenitic Alloy 20 Flat Bar


Alloy 20 Round Bar Sizes

US Bar Metric Japanese Canadian/ASTM
Diameter(Inch) Alloy 20 Bar Size Diameter (millimeter) Alloy 20 Bar Size Diameter (millimeter) Alloy 20 Bar Size Diameter (millimeter2) Alloy 20 Bar Size
0.250 #2 5 5 6 6 100 10M
0.375 #3 5.5 5.5 10 10 200 15M
0.500 #4 6 6 13 13 300 20M
0.625 #5 7 7 16 16 500 25M
0.750 #6 8 8 19 19 700 30M
0.875 #7 9 9 22 22 1000 35M
1.000 #8 10 10 25 25 1500 45M
1.125 #9 11 11 29 29 2500 55M
1.250 #10 12 12 32 32
1.375 #11 14 14 35 35
1.500 #12 16 16 38 38
1.625 #13 18 18 41 41
1.750 #14 20 20 44 44
1.875 #15 22 22 48 48
2.000 #16 25 25 51 51
2.250 #18 28 28 57 57
32 32
36 36
40 40
44 44
50 50

Alloy 20 Round Bar Weight Chart

Alloy 20 Bar Size kilogram / Meter kilogram / Foot Size kilogram / Meter kilogram / Foot Size kilogram / Meter kilogram / Foot
1/8" 0.062 0.019 22 millimeter 2.979 0.908 3 to 1/4" 41.996 12.800
3 millimeter 0.055 0.017 20 millimeter 2.470 0.753 3" 35.762 10.900
4 millimeter 0.098 0.030 24 millimeter 3.543 1.080 3 to 3/4" 55.780 17.001
5/32" 0.095 0.029 7/8" 3.038 0.926 3 to 1/2" 48.772 14.850
5 millimeter 0.154 0.047 1" 3.970 1.210 4 to 1/4" 72.249 21.908
3/16" 0.141 0.043 25 millimeter 3.871 1.180 4" 63.340 19.306
6 millimeter 0.223 0.068 27 millimeter 4.490 1.368 4 to 3/4" 90.249 27.366
7/32" 0.190 0.058 26 millimeter 4.170 1.271 4 to 1/2" 80.340 24.4487
7 millimeter 0.298 0.091 30 millimeter 5.548 1.691 5 to 1/2" 121.000 36.690
1/4" 0.249 0.076 1 to 1/8" 5.033 1.534 5" 99.940 30.461
8 millimeter 0.398 0.120 32 millimeter 6.314 1.894 6 to 1/2" 167.630 51.093
5/16" 0.387 0.118 1 to 1/4" 6.349 1.924 6" 143.900 43.860
3/8" 0.557 0.170 35 millimeter 7.553 2.390 7 to 1/2" 225.000 68.226
9 millimeter 0.498 0.152 1 to 3/8" 7.550 2.303 7" 196.000 59.432
11 millimeter 0.748 0.228 38 millimeter 8.903 2.792 10" 397.140 121.048
10 millimeter 0.620 0.189 36 millimeter 7.999 2.438 8" 254.55 77.586
12 millimeter 0.889 0.271 40 millimeter 9.872 3.009      
7/16" 0.761 0.232 1 to 1/2" 8.951 2.715      
13 millimeter 1.043 0.318 1 to 3/4" 12.179 3.712      
1/2" 0.994 0.303 1 to 5/8" 10.449 3.200      
9/16" 1.256 0.383 1 to 7/8" 13.977 4.260      
14 millimeter 1.207 0.368 45 millimeter 12.555 3.807      
5/8" 1.551 0.473 50 millimeter 15.414 4.698      
15 millimeter 1.391 0.424 48 millimeter 14.205 4.330      
17 millimeter 1.791 0.543 2 to 1/8" 17.963 5.475      
16 millimeter 1.578 0.481 2" 15.906 4.848      
18 millimeter 2.001 0.610 60 millimeter 22.205 6.768      
11/16" 1.880 0.573 2 to 1/4" 20.128 6.135      
3/4" 2.237 0.682 2 to 3/8" 22.435 6.838      
      2 to 1/2" 24.856 7.576      
      2 to 5/8" 27.409 8.354      
      2 to 3/4" 30.083 9.169

You need our support, to have any projects?

Ready Stock of Alloy 20 Round Bar

  • Alloy 20 Round Bar
  • Grade 20 Alloy Hollow Bars
  • Carpenter 20 Bright Bar
  • ASME SB473 Alloy 20 Bars
  • Gr 20 Bars & Rods Supplier
  • Incoloy® Alloy 20 Square Bar
  • ASTM B473 Gr 20 Flat Bar
  • Gr 20 Alloy Threaded Bar Stockist
  • Alloy UNS N08020 Rod
  • Alloy 20 Round Bar
  • Alloy EN NiCr20CuMo Forged Bar
  • Incoloy® Alloy 20 Hot Rolled Bar
  • ASTM B473 Alloy 20 Hex Bar
  • Alloy AFNOR Z2NCUD31-20AZ Rectangular Bar
  • Carpenter 20Cb-3® Forged Bars
  • Alloy 20 Round Bar
  • Alloy DIN 2.4660 Hexagonal Rods
  • Alloy 20cb3 180° Hexagon Bar
  • WERKSTOFF NR. 2.4660 Polished Bright Bar
  • SB473 Gr 20 Alloy Precision Ground Bar
  • Alloy 20cb3 Threaded Bar
  • ANSI B16.9 Grade 20 Alloy Round Bar
  • Grade 20 Alloy T-Bar

  • ASTM B473 Grade 20 Alloy T-Bar
  • Incoloy® Alloy 20 Round Bar
  • Alloy 20 Cold Drawn Round Bar
  • Alloy DIN 2.4660 Half-Round Bar
  • Grade 20 Alloy Black Bar Stockholder
  • ASME SB473 Incoloy Alloy 20 Triangle bar
  • Carpenter 20Cb-3® Sheared & Edged Bar
  • Alloy 20cb3 Welding Rods
  • Alloy UNS N08020 Spring Bar
  • Gr 20 Round Bar Manufacturer
  • Alloy AFNOR Z2NCUD31-20AZ Blank Sheet Bar
  • Alloy 20 Black Bar
  • Alloy EN NiCr20CuMo Reducing Nipple
  • Incoloy® Alloy 20 Polished Bars Exporter
  • ANSI B16.9 20 Alloy Bars & Rods
  • Gr 20 Alloy Hardened & Tempered Bar
  • SB473 Gr 20 Alloy Grinded Machined Bar
  • ANSI B16.9 Alloy 20 Round Bar
  • Alloy 20cb3 Large Diameter Bars
  • Carpenter 20 Bars Distributor
  • Alloy 20 Flat Bar Sizes Manufacturer
  • Alloy 20CB-3® Hexagon Bar
  • ASME B16.9 Gr 20 Alloy Forged Bars

Alloy 20 Round Bar Application Industries

Application Industries

Refineries

90%

Oil and Gas Industry

96%

Power Generation

80%

Pharmaceutical Equipment

85%

Pulp & Paper Industry

88%