Titanium Gr.5 SORF Flanges, Manufacturer of ASTM A182 Titanium Gr 5 Lap Joint Flanges, Ready Stock Of Ti Alloy Gr 5 Flanges, Ti Grade 5 Long Weld Neck Flanges, Ti Alloy Gr 5 Threaded Flanges Supplier in Mumbai.
Unifit Metal Alloys is a renowned trader and stockist of Titanium Grade 5 Flanges, whichhas a ferromagnetic nature.Titanium UNS R56400 Orifice Flanges have ferromagnetism as well as strong electrical and thermal conductivity. It has brilliant weathering resistance to corrosive soda and other related alkalis. It hardens slowly, although it may be cold treated to relatively high strength levels while remaining ductile. It has very ductile mechanical characteristics across a wide temperature range. It has less carbon to prevent embrittlement by inter-granular carbon at temperatures above 315 degrees Celsius. This alloy's reduced carbon content renders it resistant to graphitization and hence less prone to embrittlement. Because high-speed steel tools are advised, those who utilize this Titanium WNR 3.7165 Ring Type Joint Flanges find it ideal in deep drawing, spinning, and coining.
Titanium Alloy Gr 5 Flanges, Ti Alloy Gr 5 WNRF Flange, Titanium Gr 5 Slip On Flange, UNS N56400 Blind Flanges, DIN 3.7165 Socket Weld Flanges, Titanium Gr 5 Square Flange, ANSI B16.5 Titanium Gr.5 RTJ Flanges, Ti Alloy Gr 5 Lap Joint Flanges Manufacturer In Mumbai, India.
This allows a consumer to combine the product's strength with the consistency of compositional controls. This product is generally heat treated at temperatures ranging from 760° C to 1050° C before being quenched in water or quickly cooled by other methods. It has a wide range of uses, including chemical processing and storage, synthetic fiber production, and so on. Titanium 6Al-4V Reducing Flanges is also employed in aircraft, petro chemistry, power generation, and marine/offshore engineering. They are very resistant to various corrosive media, particularly hydrofluoric acid and alkalis. They are extremely ductile across a wide temperature range and may be welded and treated using normal shop fabrication techniques. While it has a modest work-hardening rate, it may be cold treated to somewhat high strength levels while retaining ductility.
arbon content becomes significant when operational temperatures for these Grade 5 Titanium AWWA Flanges are predicted to surpass 600 degrees Fahrenheit. It has a very low work-hardening rate and a low annealed hardness. It is noble, yet it is easily machined by traditional means. It may be hot formed to any shape and cold formed using any process. It is a low-carbon variant with a maximum carbon content of 0.02 percent, as compared to 0.15 percent, and as a result, they can be used for somewhat different reasons.
Get a best quote for Titanium Alloy Gr 5 SORF Flanges, We Keep Bulk Stock of Titanium Gr.5 Flanges at our stockyard, contact us to request a quote.
Titanium Gr.5 Flanges Specifications
| Size Chart | 1/2" (15 NB) to 48" (1200NB) DN10~DN5000 |
|---|---|
| Standards | ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092 |
| Pressure Rating | Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS |
| Pressure Calculation in DIN | 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 |
| UNI | 6Bar 10Bar 16Bar 25Bar 40Bar |
| EN | 6Bar 10Bar 16Bar 25Bar 40Bar |
| Coating | Oil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized |
| Most common types | Forged / Threaded / Screwed / Plate |
| Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| Production Technique | Forged, Heat treated and machined |
| Connect Type/ Flange Face Type | Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove |
| Special design | As per your drawing AS, ANSI, BS, DIN and JIS |
| Test | Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector |
| Equipment | Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc |
| Manufacturer of | ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc. B.S: BS4504 , BS3293, BS1560, BS10 The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203; UNI2276 |
