Titanium Gr 2 Bars, Manufacturer of ASTM B348 Alloy Gr 2 Bright Bar, Ti Alloy Gr 2 Square Bar, Ready Stock Of Ti Gr 2 Hollow Bars, Titanium Alloy Gr 2 Round Bar Supplier in Mumbai.
Unifit Metal Alloys is a supplier of Titanium Grade 2 Round Bars, whichis resistant to SCC in chloride salts as well as non-oxidizing halide attack.
This product's extremely low carbon content almost eliminates grain boundary assaults even at temperatures beyond 315 degrees Celsius (599 Degree F). Titanium UNS R50400 Square Bars will be forged between 2200° F / 1600° F (1205° C / 870° C), however minor forging may be performed below 1200° F (650° C) to improve mechanical qualities. It is utilized in numerous processes as a modification to regulate carbon, preventing it from being embrittled by intergranular precipitates at temperatures ranging from 600 to 1400 degrees Fahrenheit.
Gr 2 Titanium Flat Bar, ANSI B16.9 Alloy Gr 2 Round Bar, Grade 2 Titanium Hollow Bars, ASME SB348 Ti Gr 2 Threaded Bar, DIN 3.7035 Hot Rolled Bar, Gr2 Alloy Hex Bar, UNS R50400 Forged Bar, High Quality Titanium Gr 2 Rectangular Bar Manufacturer In Mumbai, India.
It is extremely resistant to caustic alkalis up to and including molten state. Titanium WNR 3.7035 Flat Bars is utilized in the manufacture of benzene, methane, and ethane, as well as in reactors and containers. And so its used in the production of soap and viscose rayon. At temperatures exceeding 315 degrees Celsius, the tensile strength and elongation of this alloy decrease dramatically (600 Degree F). It is also utilized in the electrolysis of caustic soda from salt solutions and subsequent concentration operations. Ti-Alloy Gr2 Threaded Bars should be annealed at temperatures ranging from 1300 to 1600 degrees Fahrenheit. Such product, which stands out for its low C-concentration, is preferable at application temperatures over 300° C (572° F).
It is also used to make neutral and reducing salt solutions; reactive chlorides such as phosphorus dichloride, phosphorus ox chloride, nitrosyl chloride, benzyl chloride, and benzyl chloride; bromine and phenol; fluorine and chlorine; and other related chemicals. Because sulphurous atmospheres are corrosive, it may also be employed in fresh and many other process waters. Grade 2 Titanium Hollow Bars has strong magnetostrictive capabilities and is resistant to a variety of reducing agents and caustic alkalis. This alloy should be annealed at temperatures ranging from 1300 to 1600 degrees Fahrenheit. It has less carbon to minimize embrittlement caused by intergranular carbon at high temperatures.
Get a best quote for Titanium Gr 2 Round Bar, We Keep Bulk Stock of Titanium Alloy Grade 2 Hexagon Bar at our stockyard, contact us to request a quote.
Titanium Gr 2 Round Bar Specifications
| Dimensions | DIN, EN, ASTM, JIS, ASME, BS, AISI |
|---|---|
| Round bar size | Diameter: 3-~800mm |
| Flat bar size | Thickness: 2 -100mm |
| Width: 10 to 500mm | |
| Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
| Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
| Rectangular Bars Section | 3.0 to 12.0mm thickness |
| Billet Size | 1/2 to 495mm Diameter |
| Rectangles Size | 33 x 30mm to 295 x 1066mm |
| Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| Dimensions | Diameter / Height: |
| Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| Surface | Hot Rolled Pickled, Bright, Sand Blasting Finished, Cold Drawn, Hairline,Polished |
| Condition | Hardened & tempered, annealed |
| Technique | Stainless Steel Cold Drawn, Hot Rolled, Forged Round Bar,Cold Rolled, Rod |
| Processing | Bar cutting to 650mm |
| Form | Rod, Round, Channel Bar, T-Bar, Flat Bar, Precision Ground Bar, Blocks, Square, Rings, Round Rod, Triangle, Hollow, Rectangle, Threaded, Hex (A/F), Profiles, Half Round Bar, Ingot, Billet, I/H Bar, Forging etc. |
