Manufacturers & Suppliers of Flanges, Pipe Fittings & Tube Fittings

Stainless Steel 316H Forged Fittings

  • Home
  • Stainless Steel Forged Fittings

316H SS High Pressure Forged Fittings, SS 316H Forged Fittings, Ready Stock Of SS 316H Forged Steel Fittings, Manufacturer of ASTM A403 WP316H Cross, Stainless Steel 316H Full Couplings Supplier in Mumbai.

Unifit Metal Alloys is a known seller and manufacturer of SS 316H Forged Fittings, which may be tailored to meet the demands of the customer.

There are several industry and regulatory requirements for producing this Stainless Steel UNS S31609 Threaded Reducing Bushings Fittings, which is manufactured by rolling plate and welding the seam. Meanwhile, their assemblies are almost always formed through the use of fittings. It is carefully thought out to reduce stress concentrations and give integrated support without the need for weld fortification. It is often known as a branch connection and is available in reduced or full size for a straight section of pipe. It is made by rolling steel and welding the seam together. It can move liquid in tight places without the help of, and in opposition to, external forces such as gravity.

Stainless Steel 316H Forged Fittings, ANSI B16.9 Stainless Steel 316H Forged Union, 316H Stainless Steel 3000 LB Forged Screwed Fittings, SS 316H Threaded Plug, SS 316H 90 Deg Screwed Threaded Elbow, SS 316H Reducer, 316H Stailess Steel Union, UNS S31609 Equal Tee Manufacturer In Mumbai, India.

If the diameter of this Stainless Steel WNR 1.4919 Socket Weld Elbows Fittings is sufficiently tiny, the mixture of surface tension (produced by liquid consistency) cement forces between the container and liquid will proceed to winch up the liquid. It happens as a result of intermolecular interactions between the liquid and the surrounding solid surfaces. In a nutshell, the capillary act in this alloy is caused by adhesion and cohesion pressures, which cause the liquid to operate against gravity. Process control and non-destructive testing enable properly defined products to return to service in a variety of applications.

With a scarfing blade, the weld flash of 316H Stainless Steel Threaded Elbows Fittings may be separated from the inside or exterior surfaces. This steel's weld zone can also be heat shaped to make the seam less visible. They are made by either a hot or cold forming method from seamless tube and pipe. It has tighter dimensional tolerances than seamless and can be less expensive if produced in the same numbers. It is formed into halves or shells and longitudinally seam-welded. It may also be produced to our clients' specifications in terms of size, thickness, and other parameters. They are also constructed with high-quality steel, resulting in exceptional performance and longevity.

Stainless Steel 316H Forged Fittings

Get a best quote for SS WP316H Forged Fittings, We Keep Bulk Stock of Stainless Steel 316H Socket Weld Tee Fittings at our stockyard, contact us to request a quote.

Stainless Steel 316H Forged Fittings Specifications

Standards ASTM A182 / ASME SA182
Specifications ASME B16.11, MSS SP-79, 83, 95, 97, BS 3799
Size Range NPS 1/8″- 4″ (DN 6~100)
Rating Pressure Threaded End - 2000/3000/6000 LBS.
Socket weld End – 3000/6000/9000 LBS.
Type Socket Weld, Screwed, BSP Threaded & NPT Threaded

SS 316H Forged Fittings Equivalent Grades

STANDARD UNS WERKSTOFF NR. AFNOR EN JIS BS GOST
SS 316H S31609 - - - - - -

Stainless Steel 316H Threaded Forged Fittings Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
316H min. 0.04 0.04 0 - - 16.0 2.00 - 3.00 10.0 -
max. 0.10 0.10 0.75 0.045 0.03 18.0 14.0 -

316H Stainless Steel Forged Socket Weld Fittings Mechanical Properties

Grade

Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
316H 515 205 40 95 217

Various Types Of Stainless Steel 316H Forged Fittings

SS 316H Forged 90 Degree Elbow

SS 316H Forged 90 Degree Elbow

UNS S31609 Forged 90 Degree Elbow 316H Stainless Steel Forged 90 Degree Elbow ANSI B16.9 316H Forged 90 Degree Elbow 316H SS Forged 90 Degree Elbow
SS 316H Forged Socket Weld Tee

SS 316H Forged Socket Weld Tee

Stainless Steel 316H Forged Socket Weld Tee UNS S31609 Forged Socket Weld Tee ANSI B16.9 SS 316H Forged Socket Weld Tee 316H SS Forged Socket Weld Tee
SS 316H Forged 45 Degree Elbow

SS 316H Forged 45 Degree Elbow

316H SS Forged 45 Degree Elbow UNS S31609 Forged 45 Degree Elbow 316H Stainless Steel Forged 45 Degree Elbow ANSI B16.9 Stainless Steel 316H Forged 45 Degree Elbow
SS 316H Forged Socket Weld Cross

SS 316H Forged Socket Weld Cross

UNS S31609 Forged Socket Weld Cross Stainless Steel 316H Forged Socket Weld Cross 316H SS Forged Socket Weld Cross ANSI B16.9 SS 316H Forged Socket Weld Cross
SS 316H Threaded / Screwed Hex Plug

SS 316H Threaded / Screwed Hex Plug

ANSI B16.9 Stainless Steel 316H Threaded / Screwed Hex Plug 316H Stainless Steel Threaded / Screwed Hex Plug UNS S31609 Threaded / Screwed Hex Plug 316H SS Threaded / Screwed Hex Plug
SS 316H Threaded / Screwed Unionp

SS 316H Threaded / Screwed Union

Stainless Steel 316H Threaded / Screwed Union 316H SS Threaded / Screwed Union UNS S31609 Threaded / Screwed Union ANSI B16.9 SS 316H Threaded / Screwed Union
SS 316H Threaded / Screwed Street Elbow

SS 316H Threaded / Screwed Street Elbow

316H SS Threaded / Screwed Street Elbow ANSI B16.9 316H SS Threaded / Screwed Street Elbow Stainless Steel 316H Threaded / Screwed Street Elbow UNS S31609 Threaded / Screwed Street Elbow
SS 316H Forged Socket Weld Half Coupling

SS 316H Forged Socket Weld Half Coupling

ANSI B16.9 SS 316H Forged Socket Weld Half Coupling UNS S31609 Forged Socket Weld Half Coupling 316H SS Forged Socket Weld Half Coupling 316H Stainless Steel Forged Socket Weld Half Coupling

Stainless Steel 316H Forged Fittings Size Range & Dimensions

DN-NPT MAJOR DIAMETER MM TAPPING /DRILL SIZE MM TPI PITCH MM
1/16″ 7.895 6.00 27 0.941
1/8″ 10.242 8.25 27 0.941
1/4″ 13.616 10.70 18 1.411
3/8″ 17.055 14.10 18 1.411
1/2″ 21.223 17.40 14 1.814
3/4″ 26.568 22.60 14 1.814
1″ 33.228 28.50 11.5 2.209
1¼” 41.985 37.00 11.5 2.209
1½” 48.054 43.50 11.5 2.209
2″ 60.092 55.00 11.5 2.209
2½” 72.699 65.50 8 3.175
3″ 88.608 81.50 8 3.175
3½” 101.316 94.30 8 3.175
4″ 113.973 107.00 8 3.175
5″ 141.300 134.384 8 3.175
6″ 168.275 161.191 8 3.175
8″ 219.075 211.673 8 3.175
10″ 273.050 265.311 8 3.175
12″ 323.850 315.793 8 3.175

Stainless Steel 316H Forged Fittings Class, Size & Wall Thickness

Description Class Designation
3000 6000 9000
Elbows 45 and 90 degrees,
Tees, Crosses, Couplings,
Half-Couplings,
End or Pipe Caps
1/2 – 4 1/2 – 2 1/2 – 2
1/2 – 4 1/2 – 2 1/2 – 2
1/2 – 4 1/2 – 2 1/2 – 2
Pipe Size
by Wall Thickness
SCH 80 / XS SCH 160 XXS

You need our support, to have any projects?

Ready Stock of Stainless Steel 316H Forged Fittings

  • Stainless Steel 316H Forged Fittings
  • 316H SS 90 Deg Screwed Threaded Elbow
  • SS 316H Forged Fittings
  • Stainless Steel 316H Forged Steel Fittings
  • ASME SA403 WP316H Stainless Steel Cross
  • Stainless Steel 316H Forged Union
  • 316H Stainless Steel Equal Tee
  • Stainless Steel 316H 3000 LB Forged Screwed Fittings
  • ASTM A403 WP316H Union Distributor
  • Stainless Steel 316H Hex Plug
  • 316H SS Threaded Plug Stockist
  • SS 316H Class 6000 Fittings
  • Stainless Steel 316H High Pressure Forged Fittings
  • 15 NB SCH 10 SS 316H Equal & Unequal Cross Leading
  • SS 316H 90deg. LR Elbow
  • ANSI B16.9 Stainless Steel 316H Forged Tee
  • 316H Stainless Steel Forged Fittings
  • Stainless Steel 316H Pipe Nipple
  • SS 316H Full Couplings Supplier
  • ASTM A403 WP316H Bushing
  • Stainless Steel 316H Pipe End Cap Manufacturer
  • SS 316H Swage Nipple
  • 316H Stainless Steel 45deg. Elbow Stockholder

  • ASME B16.9 SS 316H Threaded Unequal Tee
  • ANSI B16.9 SS 316H Hex Nipples
  • Stainless Steel 316H Threaded Bull Plug
  • SS 316H Threaded Tee Distributor
  • Stainless Steel 316H Forged Elbows
  • ASTM A403 WP316H Stainless Steel Forged Cross
  • Stainless Steel 316H Square Plug
  • ASTM A403 WP316H Stainless Steel Forged Cross
  • 316H Stainless Steel Socket Weld Boss
  • SS 316H Screwed Hex Plug Stockholder
  • Stainless Steel 316H Full Couplings
  • UNS S31609 Forged Socket Weld Hex Nipple
  • Stainless Steel 316H Threaded 90° Outlet Elbow
  • 316H SS Screwed Cap Manufacturer
  • ASM16E SA403 WP316H SS Socket Weld Adapters
  • Stainless Steel 316H Reducing Tee
  • 316H Stainless Steel Forged Fitting Manufacturer
  • SS 316H Forged Pipe Fitting
  • Stainless Steel 316H Street Elbow Exporter
  • 316H Stainless Steel Threaded Plug
  • Stainless Steel 316H Forged Fittings
  • SS 316H 90 Deg Screwed Threaded Elbow
  • ANSI B16.9 316H SS LB Forged Screwed Fittings
  • Stainless Steel 316H Full Couplings

316H SS Forged Fitting Application Industries

Application Industries

Refineries

90%

Oil and Gas Industry

96%

Power Generation

80%

Pharmaceutical Equipment

85%

Pulp & Paper Industry

88%