ASTM A420 WPL6 Elbow, LTCS A420 WPL6 LR Elbow, Carbon Steel ASTM A420 WPL6 Buttweld Fittings, Ready Stock Of CS Low Temperature Pipe Fittings, Manufacturer of Low Temperature A420 WPL6 Pipe Elbow Supplier in Mumbai.
Unifit Metal Alloys is supplier of CS ASTM A420 WPL6 Fittings, whichhas a much greater rate of thermal expansion than unalloyed steel.
In sulphuric acid and sodium hydroxide experiments, it considerably outperforms. Carbon Steel ASME SA420 WPL6 Reducer Fittings should be annealed at temperatures ranging from 1010 to 1121 degrees Celsius, followed by fast chilling. However, in this alloy, service tests are suggested to account for the impacts of particular working circumstances that may influence corrosion behaviour. It prevents pitting when exposed to phosphorous acids, bromides, chlorides, and iodides. Heat treatment cannot stiffen it; however, cool working will solidify it. It does not respond to thermal treatment and can be toughened by cold working. They are non-magnetic when annealed but show some attraction during or after welding.
ANSI B16.9 SA 420 WPL6 Welded Fittings, WPL6 Low Temperature Carbon Steel Pipe Fittings, Carbon Steel ASTM A420 WPL6 Short Radius Elbow, A420 Grade WPL6 Pipe Cap, Low Temperature Carbon STEEL Buttweld Fittings, Low Temperature Carbon Steel WPL6 Reducer, Low Temperature CS A420 WPL6 90 Degree Elbow, LTCS Grade WPL6 Stub End Manufacturer In Mumbai, India.
ASTM A420 Carbon Steel WPL6 Bend Fittings has high durability and usefulness, as well as dimensional precision and dependability. It is readily welded and processed using normal shop manufacturing techniques. In general, media that do not corrode this steel will not target these molybdenum-containing types. Because of its exceptional corrosion resistance, it has been used in the processing of many compounds that are then used by the chemical process sectors. It is prevalent in the hydrocarbon refining sectors. Columbium-tantalum precipitates within the granules rather than at the grain borders in this steel carbide.
ASME SA420 Carbon Steel WPL6 Stub End Fittings is readily welded and processed using normal shop manufacturing techniques. Slow speeds and continuous positive feeds in this alloy will reduce its propensity to work harden. It is classified as a multi-purpose austenitic steel because of its high thermal and corrosion protection. This steel's higher carbon content provides for superior high temperature creep properties. It also belongs to another class of steels known as precipitation-hardened steels, which are a mix of martensitic and austenitic steels. It is used in the fabrication of radiant super-heaters, boiler tubes, high-pressure steam conduit, and basic refining pipework. Its primary feature is corrosion resilience at high temperatures, which is due to niobium stabilisation.
Get a best quote for Carbon Steel ASTM A420 WPL6 Seamless Fittings, We Keep Bulk Stock of Low Temperature CS Buttweld Fittings at our stockyard, contact us to request a quote.
Carbon Steel ASTM A420 WPL6 Fittings Specifications
Specifications | ASTM A420 / ASME SA420 |
---|---|
Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
Size | Seamless Fittings: 1/2" - 10" Welded Fittings: 1/2" - 48" |
Thickness | SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75 |
Manufacturing Standards | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43 DIN : DIN2605, DIN2615, DIN2616, DIN2617, DIN28011, DN15-DN1200 BS : BS4504, BS4504, BS1560, BS10 JIS : JIS B2311, JIS B2312, JIS B2313, JIS B2316 GOST : GOST 17375, GOST 17376, GOST 30753, GOST 17378, GOST 17379, GOST 17380 EN: EN10253-1, EN10253-2 |
Types | Seamless / ERW / Welded / Fabricated |
Connection | Welding |
Bending Radius | R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom |
Elbow | Angle : 22.5 deg, 30deg, 45 deg, 90 deg, 180 deg, 1.0D, 1.5D, 2.0D, 2.5D, 3D, 4D, 5D, 6D, 7D-40D. Standard: ASME B16.9, ASME B16.28, ASME B16.25, MSS SP-75 DIN2605 JISB2311 JISB2312 JISB2313, BS, GB, ISO |
Manufacturing process | Push, Press, Forge, Cast, etc. |
Specialized manufacturer of | 90º Elbows, Couplings, Reducers, Inserts, Caps, Nipples, 45º Elbows, Tees, Crosses, Equal Tees & Reducing Tees |
Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 |