Carbon Steel Round Bar, Ready Stock Of CS A350 Hollow Bars, Manufacturer of ASTM A105 Carbon Steel Bright Bar, A105 CS Square Bar, A105 Carbon Steel Bars Supplier in Mumbai.
Unifit Metal Alloys is an acknowledged supplier and manufacturer of CS Round Bars, which is widely considered to be the most prevalent austenitic metal.
Carbon Steel Square Bars is used in industries that makes tyre covers, hose fittings, household appliances, exhaust manifolds, and other places. It's also used in steel hardware, pressure containers, storage barrels, and piping. Cold casting of screws, bolts, and fasteners requires a lower work hardening rate of this product. It is not susceptible to thermal stress or cycle heating. It is resistant to sulphidation and other types of hot corrosion due to its high chromium and nickel concentration. It has better oxidation protection and retains a greater proportion of room temperature strength than typical austenitic alloys. Under slightly cyclic circumstances, it can withstand oxidation up to 2010 degrees F.
Carbon Steel A105 Flat Bar, CS A105 Threaded Bar, A105 Carbon Steel Forged Bar, Carbon Steel Hot Rolled Bar, Carbon Steel Cold Drawn Hex Bar, ASTM A350 Carbon Steel Rectangular Bar, Mild Steel Hollow Bars, ANSI B16.9 Carbon Steel Hot Rolled Round Bar Manufacturer In Mumbai, India.
Carbon Steel Flat Bars is frequently used at cryogenic temps because of its high toughness and limited magnetic leakage. It is found in fluidised bed combustors, tube hangers for hydrocarbon processing and steam furnaces, kilns, radiant tubes, and other applications. Because of the high chromium and nickel composition, this alloy has good oxidation protection and high strength at high temperatures. It has great oxidation protection and better strength at temps up to 2100 degrees Fahrenheit. The primary features of these goods are their high chromium and medium nickel concentration, which makes them resistant to oxidation, sulfidation, and other types of hot corrosion.
Carbon Steel Threaded Bars demonstrates corrosion and longevity resistance. It contains less carbon, which improves corrosion protection after soldering. It has a hearty amount of chromium, which is the alloy that gives carbon steels their famed corrosion resilience. They are both non-hardenable through thermal treatment and easily shaped and drawn. It can be easily brake or roll formed into a number of components for architectural, commercial, and transportation uses. They are both heat-hardenable but easily made and drawn. These key qualities are their high chromium and middling nickel concentration, which makes them resistant to oxidation, sulfidation, and other forms of hot corrosion.
Get a best quote for Carbon Steel Round Bar, We Keep Bulk Stock of Carbon Steel A105 Hexagon Bar at our stockyard, contact us to request a quote.
Carbon Steel Round Bar Specifications
| Carbon Steel Bar Standard | ASTM A105, ASTM A479, AMS 5513, AMS 5511, AMS 5647 |
|---|---|
| Carbon Steel Bar Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Carbon Steel Round bar size | Diameter: 3-~800mm |
| Carbon Steel Hex Bar size | 2-100mm A/F |
| Carbon Steel Flat bar size | Thickness: 2 -100mm |
| Width: 10 to 500mm | |
| Carbon Steel Square bar size | 4 to 100mm |
| Carbon Steel Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
| Carbon Steel Rectangular Bars Section | 3.0 to 12.0mm thickness |
| Carbon Steel Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
| ASTM A105 Type Carbon Steel Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| Carbon Steel Threaded Bar Billet Size | 1/2 to 495mm Diameter |
| Carbon Steel Rectangular Size | 33 x 30mm to 295 x 1066mm |
| Carbon Steel Hex Bars Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| ASTM A105 Type Carbon Steel Hollow Bar Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Carbon Steel T-Bar Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
| Rolled Carbon Steel Flat Bars Condition | Hardened & tempered, annealed |
| ASTM A105 Type Carbon Steel Cold Rolled Bar Technique | Carbon Steel Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
| Carbon Steel Rod Processing | Bar cutting to 650mm |
| Carbon Steel Rounds Bar Form | Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
| Our Carbon Steel Round bar conforms to NACE MR0175/ISO 15156 | |
