Manufacturers & Suppliers of Flanges, Pipe Fittings & Tube Fittings

Incoloy 825 Flanges

  • Home
  • Incoloy Flanges

Incoloy Alloy 825 Threaded Flanges, Manufacturer of ASTM B564 Incoloy 825 Lap Joint Flanges, Ready Stock Of Nickel Alloy 825 Flanges, Alloy 825 SORF Flanges, 825 Incoloy Long Weld Neck Flanges Supplier in Mumbai.

Unifit Metal Alloys is aneminentstockist and manufacturer of Incoloy Alloy 825 Flanges, which is employed in the construction of huge structures as well as the dyeing industry. Incoloy UNS N08825 Socket Weld Flanges has a low nickel content (0.75 percent) and so has a lower corrosion resistance. It is widely used in industry, notably in food processing, since it is resistant to corrosion caused by acids contained in typical meals. It is utilised in heat exchangers, architectural trim and moulding, mining, quarrying, and water filtration screens. We provide our service for this alloy in accordance with their needs, including all Manufacture and Test Certifications, in close collaboration with our customers.It possesses excellent forming and welding characteristics, as well as high strength and corrosion resistance.

DIN 2.4858 Socket Weld Flanges, Incoloy 825 Square Flange, Incoloy Alloy 825 WNRF Flange, ANSI B16.5 Incoloy 825 RTJ Flanges, 825 Incoloy Flanges, Alloy 825 Slip On Flange, Incoloy® Alloy 825 Lap Joint Flanges, UNS N08825 Blind Flanges Manufacturer In Mumbai, India.

Incoloy WNR 2.4858 Orifice Flanges is also utilised in architectural constructions and design elements, mouldings and trimmings, sanitary or cryogenic applications, chemical industry processing equipment, and other applications. It resists rusting because to the interplay of its alloying components and the environment to which they are exposed. It may be used for many of the same things. It is easy to draw, can be shaped into a variety of forms, and may be used without being annealed. In this steel, a lower stress relieving temperature of 400 degrees Celsius is required. It's also found in heat exchangers, chemical containers, pipelines, and in the brewing sector.

However, in applications where the custom wire basket or rack must carry a load through high temperatures or is subjected to very corrosive circumstances, Nickel Alloy 825 Ring Type Joint Flanges is typically a superior alternative in terms of usable life and long-term cost-effectiveness. The inclusion of nickel not only makes this alloy more corrosion resistant, but it also makes it much simpler to press and draw. Because the added nickel in this product flatware lends itself to a brighter surface, it is a bit tougher (which means the points are somewhat more challenging to bend forth and back). Since alloys include 9 percent to 11 percent nickel, it possesses resistance to moderately harsh organic acids.

Incoloy 825 Flanges

Get a best quote for Incoloy 825 SORF Flanges, We Keep Bulk Stock of Incoloy Alloy 825 Flanges at our stockyard, contact us to request a quote.

Incoloy 825 Flanges Specifications

Size Chart 1/2" (15 NB) to 48" (1200NB) DN10~DN5000
Standards ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092
Pressure Rating Class 150 LBS, 300 LBS, 825 LBS, 900 LBS, 1500 LBS, 2500 LBS
Pressure Calculation in DIN 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64
UNI 6Bar 10Bar 16Bar 25Bar 40Bar
EN 6Bar 10Bar 16Bar 25Bar 40Bar
Coating Oil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized
Most common types Forged / Threaded / Screwed / Plate
Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Production Technique Forged, Heat treated and machined
Connect Type/ Flange Face Type Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove
Special design

As per your drawing

AS, ANSI, BS, DIN and JIS
15 NB (1/2") to 200 NB (8")
Equal and Reducing Configurations

Test Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector
Equipment Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc
Manufacturer of

ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc.
-BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange

B.S: BS4504 , BS3293, BS1560, BS10
AS 2129: Table D; Table E; Table H
ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48
ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
American standard (ANSI)
German (DIN)
British standard (BS)

DIN: DIN 2527, DIN 2566, DIN 2573, DIN 2576, DIN 2641, DIN 2642, DIN 2655, DIN 2656, DIN 2627, DIN 2628, DIN 2629, DIN 2631, DIN 2632, DIN 2633, DIN 2634, DIN 2635, DIN 2636, DIN 2637, DIN 2638 ASTM B564 F316 Stainless Steel Flanges
The other standard: AWWA C207; EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203; UNI2276

Incoloy 825 Flanges Equivalent Grades

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Incoloy 825 2.4858 N08825 NCF 825 NA 16 ЭП703 NFE30C20DUM NiCr21Mo XH38BT

Incoloy 825 Flanges Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr Al Ti
825 0.05 max 1.00 max 0.5 max 0.03 max 1.50 – 3.00 22.00 min 38.00 – 46.00 19.50 – 23.50 0.02 max 0.06 – 1.20

825 Incoloy Flanges Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
825 8.14 g/cm3 1400 °C (2550 °F) Psi – 80,000 , MPa – 550 Psi – 32,000 , MPa – 220 30 %

Various Types Of Incoloy 825 Flanges

Incoloy 825 Socket Weld Flanges

Incoloy 825 Socket Weld Flanges

DIN 2.4858 SWRF Flanges UNS N08825 Socket weld Flanges Incoloy Alloy 825 SWRF Flanges ANSI B16.5 Incoloy 825 Socket weld Flanges
Incoloy 825 Lap Joint Flanges

Incoloy 825 Lap Joint Flanges

UNS N08825 Lapped Joint Flanges DIN 2.4858 Lap Joint Flange ANSI B16.5 Incoloy Alloy 825 Lap Joint Flange Incoloy 825 LJ Flanges
Incoloy 825 Slip On Flanges

Incoloy 825 Slip On Flanges

Incoloy Alloy 825 Slip On Flanges ANSI B16.5 Incoloy Alloy 825 SORF Flanges UNS N08825 SORF Flanges DIN 2.4858 Slip On Flanges
Incoloy 825 Forged Flanges

Incoloy 825 Forged Flanges

ANSI B16.5 Nickel Alloy 825 Forged Flanges Incoloy Alloy 825 Forged Flanges UNS N08825 Forged Flanges DIN 2.4858 Forged Flanges
Incoloy 825 Orifice Flanges

Incoloy 825 Orifice Flanges

DIN 2.4858 Orifice Flanges UNS N08825 Orifice Flanges ANSI B16.5 Incoloy Alloy 825 Orifice Flanges Alloy 825 Orifice Flanges
Incoloy 825 Blind Flanges

Incoloy 825 Blind Flanges

UNS N08825 Blind Flange Incoloy 825 BLRF Flanges ANSI B16.5 Incoloy Alloy 825 Blind Flange DIN 2.4858 BLRF Flanges
Incoloy 825 Weld Neck Flanges

Incoloy 825 Weld Neck Flanges

Incoloy 825 WNRF Flanges DIN 2.4858 Weld Neck Flanges ANSI B16.5 Nickel Alloy 825 Weld Neck Flanges UNS N08825 Welding Neck Flanges
Incoloy 825 Reducing Flanges

Incoloy 825 Reducing Flanges

Incoloy Alloy 825 Reducing Flanges ANSI B16.5 Incoloy 825 Reducing Flanges UNS N08825 Reducing Flanges DIN 2.4858 Reducing Flanges
Incoloy 825 Threaded Flanges

Incoloy 825 Threaded Flanges

ANSI B16.5 Incoloy Alloy 825 Threaded Flanges UNS N08825 Threaded Flanges DIN 2.4858 Threaded Flanges Alloy 825 Threaded Flanges
Incoloy 825 Long Weld Neck Flanges

Incoloy 825 Long Weld Neck Flanges

ANSI B16.5 Incoloy 825 LWN Flanges Incoloy Alloy 825 LWN Flanges UNS N08825 Long Weld Neck Flanges DIN 2.4858 Long Weld Neck Flanges
Incoloy 825 Spectacle Blind Flanges

Incoloy 825 Spectacle Blind Flanges

DIN 2.4858 Spectacle Blind Flanges Incoloy Alloy 825 Spectacle Blind Flanges UNS N08825 Spectacle Blind Flanges ANSI B16.5 Incoloy® Alloy 825 Spectacle Blind Flanges
Incoloy 825 Ring Type Joint Flanges

Incoloy 825 Ring Type Joint Flanges

DIN 2.4858 RTJ Flanges Incoloy 825 RTJ Flanges ANSI B16.5 Incoloy Alloy 825 Ring Type Joint Flanges UNS N08825 Ring Type Joint Flanges

Weight Chart Of Incoloy 825 Flanges

Pipe Normal Diam. O.D. Flange  Thk. Of Flange Min  Diam.
of
Hub 
Diameter of Raised Face  Length Hub.Y Thread Length Diam. 
of Bolt
Circle
Diam. 
of Bolt
Holes
Number
of Bolts
Diam. of
Bolts
(inch)
KG LB
inch dn O C X G Y T BC BH BN BD
1/2" 15 89.00 11.20 30.20 35.10 15.70 15.70 60.50 15.80 4 1/2" 0.4 0.9
3/4" 20 98.50 12.70 38.10 42.90 15.70 15.70 69.90 15.80 4 1/2" 0.7 1.5
1" 25 108.00 14.20 49.30 50.80 17.50 17.50 79.30 15.80 4 1/2" 0.8 1.8
1-1/4" 32 117.50 15.70 58.70 63.50 20.60 20.60 88.90 15.80 4 1/2" 1.2 2.6
1-1/2" 40 127.00 17.50 65.00 73.20 22.40 22.40 98.60 15.80 4 1/2" 1.5 3.3
2" 50 152.50 19.10 77.70 91.90 25.40 25.40 120.70 19.10 4 5/8" 2.3 5.1
2-1/2" 65 178.00 22.40 90.40 104.60 28.40 28.40 139.70 19.10 4 5/8" 3.7 8.1
3" 80 190.50 23.90 108.00 127.00 30.20 30.20 152.40 19.10 4 5/8" 4.1 9
3-1/2" 90 216.00 23.90 122.20 139.70 31.80 31.80 177.80 19.10 8 5/8" 5.1 11.2
4" 100 228.50 23.90 134.90 157.20 33.30 33.30 190.50 19.10 8 5/8" 5.9 13
5" 125 254.00 23.90 163.60 185.70 36.60 36.60 215.90 22.40 8 3/4" 7 15.4
6" 150 279.50 25.40 192.00 215.90 39.60 39.60 241.30 22.40 8 3/4" 8.4 18.5
8" 200 343.00 28.40 246.10 269.70 44.50 44.50 298.50 22.40 8 3/4" 13 28.6
10" 250 406.50 30.20 304.80 323.90 49.30 49.30 362.00 25.40 12 7/8" 18 39.5
12" 300 482.50 31.80 365.30 381.00 55.60 55.60 431.80 25.40 12 7/8" 29 64
14" 350 533.50 35.10 400.10 412.80 57.20 57.20 476.30 28.50 12 1" 39 86
16" 400 597.00 36.60 457.20 469.90 63.50 63.50 539.80 28.50 16 1" 47 103
18" 450 635.00 39.60 505.00 533.40 68.30 68.30 577.90 31.80 16 1 1/8" 57 126
20" 500 698.50 42.90 558.80 584.20 73.20 73.20 635.00 31.80 20 1 1/8" 76 167
24" 800 813.00 47.80 663.40 692.20 82.60 82.60 749.30 35.10 20 1 1/4" 97 214

You need our support, to have any projects?

Ready Stock of Incoloy 825 Flanges

  • 825 Incoloy Socket weld Flanges
  • Alloy 825 RTJ Flanges
  • 825 Incoloy Forged Flanges
  • Incoloy Alloy 825 Flanges Supplier
  • Alloy 825 Lapped Joint Flanges
  • Incoloy Alloy 825 RTJ Flanges
  • Nickel Alloy 825 BLRF Flanges
  • Incoloy 825 Flanges
  • 825 Inconel Screwed Flanges
  • ASME SB564 Incoloy 825 Stainless Steel Pipe Flanges
  • Incoloy 825 Welding Neck Flanges
  • ASTM B564 Inconel 825 Slip On Flanges
  • Incoloy 825 Blind Flange
  • Incoloy 825 Lap Joint Flanges
  • 15 NB SCH 10 Nickel Alloy 825 Welding Neck Flanges
  • Incoloy Alloy 825 Threaded Flanges
  • Incoloy® Alloy 825 Slip On Flanges
  • Incoloy WERKSTOFF NR. 2.4858 SORF Flange
  • Incoloy® Alloy 825 Orifice Flanges
  • 825 Incoloy Long Weld Neck Flanges Stockist
  • ASTM B564 Incoloy 825 Square Flanges
  • 2.4858 Raised Face Flanges
  • ANSI B16.5 Incoloy 825 Flanges

  • Nickel Alloy 825 Industrial Flange
  • ASTM B564 Incoloy 825 Stainless Steel RTJ Flanges
  • Alloy 825 Threaded Flanges
  • 825 Incoloy Ring Type Joint Flange Manufacturer
  • Incoloy 825 Raised Face Flanges
  • 825 Incoloy Class 2500 Flange Manufacturer
  • Incoloy Alloy 825 Screwed Flanges
  • Alloy 825 Nippolet Flange Exporter
  • Nickel Alloy 825 Pipe Flanges
  • ASME B16.5 Incoloy Alloy 825 Forged Flanges
  • 825 Incoloy Raised Face Flanges
  • Incoloy 825 Forged Flanges
  • Incoloy® Alloy 825 Class 150 Flanges
  • ANSI B16.5 Inconel 825 Plate Flanges
  • Incoloy® Alloy 825 Class 900 Flanges
  • Incoloy Alloy 825 Flanges Distributor
  • ASME SB564 Incoloy 825 Orifice Flanges Stockholder
  • UNS N08825 BLRF Flange
  • Alloy 825 WNRF Flange
  • ANSI B16.5 825 Incoloy SORTJ Flange
  • DIN 2.4858 Flat Flanges
  • Inconel 825 SWRF Flange
  • 825 Incoloy Blind Flange

825 Incoloy Flanges Application Industries

Application Industries

Refineries

90%

Oil and Gas Industry

96%

Power Generation

80%

Pharmaceutical Equipment

85%

Pulp & Paper Industry

88%