Grade C276 Hastelloy Sheets, Manufacturer of ASTM B575 Alloy C276 Coils, Ready Stock Of Nickel Alloy C276 Plates, Hastelloy C276 Perforated Sheet, Hastelloy Alloy C276 Chequered Plates Supplier in Mumbai.
Unifit Metal Alloys is a supplier of Hastelloy Alloy C276 Sheets & Plates, which has the same general corrosion resistance as unsterilized chromium nickel. Forging, upsetting, and other hot work procedures for this Hastelloy UNS N10276 Sheets may be carried out at temperatures ranging from 1149° C to 1232° C. (2100 Degree F to 2250 Degree F).It is well-known for being usable with all conventional welding processes, as well as hot and cold working. They may be welded using any of the conventional fusion and resistance procedures, except oxyacetylene welding, which is not suggested. Higher welding speed is required to avoid overheating or burn-through of thinner sheets in this steel. It is particularly useful where temperatures surpass 550 degrees Fahrenheit and resistance to suffixation is required.
ANSI B16.9 Nickel Alloy C276 High Quality Plates, Grade C276 Hastelloy Half Hard Plates, Hastelloy® Alloy C276 Embossed Sheets, DIN 2.4819 Hot Rolled Plates, High Quality Hastelloy C276 90 Sheets, ASME SB575 Hastelloy C276 Shim Sheets, Hastelloy JIS NW 0276 Cold Rolled Sheets, UNS N10276 Polished Finishes Plates Manufacturer In Mumbai, India.
Hastelloy WNR 2.4819 Plates is an austenitic alloy stabilised by columbium (with tantalum) additives to limit or avoid carbide precipitation in the course of welding and in service at 800°F / 1650°F (430°C / 900°C).Because it is robust and ductile, it can be easily stamped, blanked, spun, and drawn. It is also resistant to polyphonic acid SCC and hence a desirable material for usage around reactor facilities. Because to the inclusion of columbium, this steel has outstanding corrosion resistance, even better than alloy steel. This is owing to the alloy's inability to work harden during heat treatment, leaving cold reduction as the sole technique capable of using the alloy's enhanced qualities.
Work with this Nickel Alloy C276 Coils at temperatures below 1700° F. (927 Degree C).It has a significantly higher coefficient of thermal expansion than non-alloyed steel, which, along with lower heat conductivity, predicts more deformation. It is austenitic steel with high resistance to inter-granular corrosion when exposed to temperatures in the chromium carbide precipitation range of 800 to 1500 degrees Fahrenheit. To regain optimal corrosion resistance, it must be water quenched or thoroughly annealed after operating.To get maximal hardness, it must be water quenched and annealed. Because of its resistance to inter-granular assault, it is excellent for use in aqueous and low temperature conditions.
Get a best quote for Hastelloy C276 Quarter Hard Plates, We Keep Bulk Stock of Hastelloy Alloy C276 Sheets, Plate And Coils at our stockyard, contact us to request a quote.
Hastelloy C276 Sheets, Plates & Coils Specifications
| Specifications | ASTM B575 / ASME SB575, BS EN 10088-2, en 10028-7, IS 6911 |
|---|---|
| Dimension Standard | MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc |
| Size Range | Cold rolled Plate 0.5-6.4 mm Hot rolled Plate 3.0–10.0 mm |
| Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Thickness | 0.3 mm to 120 mm |
| International Standard | ASTM A480 ASTM A959 ASME IID EN ISO 9445 EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 |
| Tolerances (width / thickness) | EN 10258/ DIN 59381) EN 10151 EN 10088 |
| Finish | 2B, 2D, BA NO (8), Cold rolled Plate (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| Hardness | Half Hard, Soft, Hard, Quarter Hard, Spring Hard |
| Value Added Service | Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc. |
| Dealers & Distributor of | SAIL, ESSAR, JINDAL, TATA, BHUSHAN, INDIAN, POSCO, JISCO, TISCO, LISCO, BAOSTEEL IMPORTED material |
| Profiling | Plasma Plate Cutting Laser Plate Cutting Oxy-propane Flame Cutting |
