Manufacturers & Suppliers of Flanges, Pipe Fittings & Tube Fittings

Alloy Steel B8M Fasteners

  • Home
  • Alloy Steel Fasteners

Ready Stock Of Cr-Mo Gr. B8M Allen Cap Bolt, Alloy Steel B8M Socket Head Cap Screw, Manufacturer of Chrome Moly B8M Threaded Rod, B8M Alloy Steel High Temperature Fasteners, Alloy Steel B8M Hex Bolt Supplier in Mumbai.

Unifit Metal Alloys is a well-known supplier of AS B8M Fasteners, which are accessible to our esteemed customers in customised sizes and forms.

Alloy Steel B8M Nuts is typically provided in the solution-treated state, following a treatment at 2150 degrees Fahrenheit (1175 degrees Celsius) and fast cooling. It will be made at 2200 degrees Fahrenheit / 1600 degrees Fahrenheit (1205 degrees Celsius / 870 degrees Celsius). However, light forging in these products may be performed at temperatures below 1200° F (650° C) to enhance mechanical characteristics. It is also rust resistant, heat resistant, and oxidation resistant, able to endure reducing or neutral atmospheres as well as oxidation. It's also used in the chemical industry for retorts, muffles, catalyst support grids, furnace baffles, pyrolysis ducting, and flash dryer components.

ASTM A193 Grade B8M Washers, Alloy Steel B8M Fasteners, Cr-Mo B8M Mushroom Head Square Neck Bolts, Alloy Steel B8M T-Head Bolts, ASME SA193 Grade B8M Hexagon Head Cap Bolts, Alloy Steel Grade B8M Stud Bolts, Alloy Steel B8M Bolts Manufacturer In Mumbai, India.

Alloy Steel B8M Bolts is prone to intergranular corrosion in the weld heat impacted zone, as are other austenitic steels where carbon is not regulated below 0.03%. However, when the new parent metal is subjected to anhydrous circumstances or in the lack of oxygen, fast corrosion can develop. To improve the cold work - hardening rate, the chromium and nickel amounts of these products are reduced. It does work harden, but it may be created with the correct procedures.When cold rolled, this results in greater tensile strengths and less ductility loss in our products. It shows significant creep resistance after a high temperature final solution anneal.

Alloy Steel B8M Washers are frequently chosen for industries that makes kitchen sinks due to their toughness, longevity, heat resilience, and simplicity of cleaning. They are used in some eateries and fast-food places, where big ornamental panels, stainless fixtures, and furnishings are used. There is a variety of our products available, each with unique properties and thus suitable for a variety of uses. It is frequently used in boat hulls, tube sheet for salt water service, salt water pipe fittings, salt water piping systems, and other applications. This steel is a nickel-based wrought alloy with good HCl acid resistance at all concentrations and temperatures.

Alloy Steel B8M Fasteners

Get a best quote for Alloy Steel B8M Bolts, We Keep Bulk Stock of Cr-Mo B8M Fasteners at our stockyard, contact us to request a quote.

Alloy Steel B8M Fasteners Specifications

Specification ASTM A193 / ASME SA193
Dimensions ASME B18.2.1, B18.3
Size M02 to M160, Custom Sizes
Length 3 mm to 200 mm
Threads METRIC, BSW, BSF, UNC, UNF or as required
In Form of Hex, Square, Round, Threading as per Gauge Etc.
Test Certificate: Manufacturer Test Certificate as per EN 10204 / 3.1
Surface finishing Zinc (yellow, white, blue, black), black oxide, Geometry, Dacroment, anodizing, nickel plated, plated zinc-nickel, Stainless steel: Passivated Self-Colour, Hot Dip Galvanised (HDG), Bright Zinc Plated (BZP), Sherardized, Stainless Steel, Mechanically Applied coating and some special one like DACROMET
Production process M2-M24: Cold Froging, hot forging M24-M100, machining and CNC for Customized connecting element
Surface Coating
  • Teflon Coated Fasteners
  • Phosphate Coated Fasteners
  • Zinc Coated Fasteners
  • Ptfe Coated
  • Xylon Coated Fasteners
  • Cadmium Coated Fasteners
  • Hot Dipped Galvanizing Coated Fasteners
All surface finishes offered including Geomet & PTFE, Galvanised, Zinc, Electroless Nickel, Sherardized, Dacromet
Packing IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request

Alloy Steel B8M Fasteners Chemical Composition

GradeCMnPSSiCrNiMo
B8M0.08% max2.00% max0.045%0.030%1.00% max16.0 - 18.0%10.0 - 14.0%2.00 - 3.00%

Alloy Steel B8M Fasteners Mechanical Properties

GradeTensile Strength (MPa) minYield Strength 0.2% Proof (MPa) minElongation (% in 50mm) minRA % min
Alloy Steel B8M Class 175303050
Alloy Steel B8M Class 2110951545

Alloy Steel B8M Fasteners Standard

Hexagon Bolt / Set Screws Stud Bolt Hexagon Nuts Socket Cap screws
DIN 931 BS4882 DIN 934 DIN 912
DIN 933 DIN 976 BS 1768 DIN 6912
BS 1768 BS 1769 DIN 7984
UNI 5731 BS 1083 ANSI B18.3
UNI 5739 BS 3692 ISO 4762
ISO 4014 ISO 4032 UNI 5931
ISO 4017 ISO 4033 BS 2470
BS 1769 ANSI B18.2.2 BS 4168
BS 3692
ANSI B18.2.1

Socket & Slotted Set Screws Socket & Slotted Countersunk Screws Studs Washers
DIN 913 DIN 963 DIN 938 DIN 125
DIN 914 DIN 7991 DIN 939 DIN 9021

Various Types Of Alloy Steel B8M Fasteners

Alloy Steel B8M Bolts

Alloy Steel B8M Bolts

A193 Grade B8M Square Bolt Alloy Steel B8M Flange Bolts Chrome Moly B8M Bolts ASTM A193 Grade B8M Anchor Bolts ASTM A193 B8M Bolts Alloy Steel B8M Carriage Bolt Cr-Mo B8M Structural Bolts
Alloy Steel B8M Screw

Alloy Steel B8M Screws

Alloy Steel B8M Socket Head Cap Screws ASTM A193 Grade B8M Wood Screw Cr-Mo B8M Hex Head Screws B8M Alloy Steel Socket Set Screw Chrome Moly B8M Eye Screw ASTM A193 Grade B8M Wing Screw Alloy Steel B8M Self Drilling Screw
Alloy Steel B8M Stud Bolts

Alloy Steel B8M Stud Bolts

Cr-Mo B8M Double Ended Studs ASTM A193 Grade B8M Tie Rods Alloy Steel B8M Fully Threaded Studs Chrome Moly B8M Stud Chrome Moly B8M Threaded Rod Alloy Steel B8M Single End Stud Bolts ASTM A193 Grade B8M Stud Bolts
Alloy Steel B8M Hex Bolts

Alloy Steel B8M Hex Bolts

ASTM A193 Grade B8M Heavy Hex Bolts Chrome Moly B8M Hex Bolts Alloy Steel B8M Hexagon Bolt ASTM A193 Grade B8M Hex Flange Bolt Cr-Mo B8M Hex Machine Bolt Alloy Steel B8M Hex Head Bolts

Weight Chart Of Alloy Steel B8M Fasteners

MM THREADS AS PER IS 1363/67
APPROXIMATE WEIGHT IN KGS FOR 100 NOS
LENGTH DIAMETER
M 5 M 6 M 8 M 10 M 12 M 14 M 16 M 18 M 20 M 22
16 mm 0.448 0.743 1.590 3.211
20 mm 0.598 0.812 1.711 3.411 4.892
25 mm 0.660 0.897 1.871 3.660 5.252 8.170
30 mm 0.737 1.010 2.070 3.912 5.574 9.690 10.707 18.657
35 mm 0.804 1.120 2.271 4.223 5.974 10.000 11.416 16.026 19.608
40 mm 0.881 1.230 2.470 4.533 6.410 10.288 12.107 16.667 20.747
45 mm 0.958 1.340 2.671 4.840 6.859 10.504 12.821 17.241 21.739
50 mm 1.030 1.450 2.870 5.155 7.299 11.261 13.624 17.857 22.727 28.409
55 mm 1.560 3.071 5.464 7.740 11.628 14.409 18.868 23.810 30.120
60 mm 1.670 3.270 5.774 8.183 12.255 15.244 20.000 25.126 32.051
65 mm 1.781 3.472 6.083 8.621 12.626 16.026 21.008 26.455 34.014
70 mm 1.890 3.671 6.394 9.058 12.987 16.835 22.124 27.778 35.461
75 mm 2.000 3.873 6.702 9.506 13.228 17.606 23.256 29.070 39.063
80 mm 2.111 4.072 7.013 10.000 13.889 18.248 24.510 30.303 40.000
90 mm 4.472 7.634 10.917 14.925 19.841 26.042 33.113 41.667
100 mm 4.873 8.251 11.820 16.340 21.459 27.778 35.714 46.296
110 mm 8.881 12.723 17.730 23.041 31.250 38.168 47.170
120 mm 9.506 13.624 18.797 24.631 32.895 40.984 50.000
130 mm 10.101 14.535 20.000 26.316 34.722 43.478 52.632
140 mm 10.707 15.432 20.833 27.933 35.461 46.296 55.556
150 mm 11.312 16.340 22.222 29.412 37.594 48.544 58.824
160 mm 11.905 17.241 24.272 31.056 40.984 50.505 61.728
170 mm 12.500 18.116 32.680 53.191 64.935
180 mm 13.123 19.011 26.882 34.247 55.556 67.568
190 mm 13.736 19.920 35.971 58.140 70.423
200 mm 14.327 20.833 29.586 37.594 49.020 60.976 73.529
220 mm 15.528 22.624 40.650 65.789 79.365
240 mm 16.722 24.510 43.860 71.429 84.746
250 mm 17.301 25.381 45.455 74.627 87.719
260 mm 17.921 26.316 47.170 76.923 90.909
280 mm 19.157 28.090 50.505 81.967 98.039
300 mm 20.325 29.940 53.763 87.719 104.167
320 mm 31.646 56.818 92.593
340 mm 33.557 60.241 98.039
360 mm 35.211 63.291 104.167
380 mm 37.037 66.667 108.696
400 mm 39.063 69.444 113.636

Dimensions Of Alloy Steel B8M Fasteners

**All measurements in millimeters**
NOMINAL SIZE (D) BODY DIAMETER HEAD THICKNEASTM A193 ACROASTM A193 THE FLATS ACROASTM A193 CORNERS
D (MAX) D (MIN) H (MAX) H (MIN) F (MAX) F (MIN) C (MAX) C (MIN)
m10 10.00 9.78 6.63 6.17 17.00 15.73 18.48 17.77
m12 12.00 11.73 7.76 4.24 19.00 17.73 20.78 20.03
m14 14.00 13.73 9.09 8.51 22.00 20.67 24.25 23.35
m16 16.00 15.73 10.32 9.68 24.00 23.67 27.71 26.75
m20 20.00 19.67 12.88 12.12 30.00 29.16 34.64 32.95
m24 24.00 23.67 15.44 14.56 36.00 35.00 41.57 39.55
m30 30.00 29.67 19.48 17.92 46.00 45.00 53.12 50.85
m36 36.00 35.61 23.38 21.63 55.00 53.80 63.51 60.79
m42 42.00 41.38 26.97 25.03 65.00 62.90 75.06 71.71
m48 48.00 47.38 31.07 28.93 75.00 72.60 86.60 82.76
m56 56.00 55.26 36.2 33.80 85.00 82.20 98.15 93.71
m64 64.00 63.26 41.32 38.68 95.00 91.80 109.70 104.65
m72 72.00 71.26 46.45 43.55 105.00 101.40 121.24 115.60
m80 80.00 79.26 51.58 48.42 115.00 111.00 132.72 126.54
m90 90.00 89.13 57.74 54.26 130.00 125.50 150.11 143.07
m100 90.00 99.13 63.9 60.10 145.00 140.00 167.43 159.60

You need our support, to have any projects?

Ready Stock of Alloy Steel B8M Fasteners

  • ASTM A193 Grade B8M Anchor Bolts
  • Alloy Steel B8M Hex Head Bolts
  • Alloy Steel B8M Half Threaded Stud Bolt
  • ASTM A193 GRADE B8M bolt
  • Alloy Steel B8M Set Screw
  • CrMo Grade B8M Anchor Bolts
  • B8M Alloy Steel Bolts
  • Alloy Steel B8M Hexagon Bolts
  • Cr-Mo B8M Carriage Bolts
  • Chromium Molybdenum B8M Screw
  • Alloy Steel B8M Eye Bolts
  • Chrome Moly B8M Mushroom Head Square Neck Bolts
  • Chromium Molybdenum B8M Full Threaded Bolt
  • Alloy Steel B8M Elevator Bolt Stockist
  • Chrome Moly B8M Structural Bolts
  • Alloy Steel B8M Washers

  • B8M Alloy Steel Draw Bolt
  • Alloy Steel Gr. B8M Hex Head Bolts
  • Alloy Steel Grade B8M Metric set Screw
  • ASTM A193 Alloy Steel B8M Fasteners
  • Alloy Steel B8M Bolts
  • Chromium Molybdenum B8M Washers
  • Chrome Moly B8M Threaded Bolt
  • Alloy Steel B8M Structural Bolts
  • ASME SA193 Grade B8M bolt
  • Alloy Steel ASTM A193 B8M Carriage Bolts
  • ASTM A193 Alloy Steel Gr. B8M Stud Bolts
  • ASTM A193 Alloy Steel B8M Elevator Bolt Stockist
  • Alloy Steel B8M Shoulder Bolt
  • Alloy Steel B8M Stove Bolts
  • ASTM A193 Alloy Steel B8M Square Bolts
  • B8M Alloy Steel Hex Head Cap Screw

Alloy Steel B8M Fasteners Application Industries

Application Industries

Refineries

90%

Oil and Gas Industry

96%

Power Generation

80%

Pharmaceutical Equipment

85%

Pulp & Paper Industry

88%