Incoloy 825

Unifit Metalloys Inc is one of the leading Manufacturer, Supplier & Exporter of Inconel 825 Round Bars, Sheets,Pipes, Pipe Fittings, Flanges and Fasteners .Inconel Plates, Sheets and Coils are available in special alloys like Inconel 600, Inconel 601, Inconel 625, Inconel 718, Inconel X-750, Incoloy 800, Incoloy 800H/ HT and Incoloy 825. We are manufactured as per the international quality and safety standards. These Sheets, Plates & Coils are widely used in various applications industry. We also offer these Maerial in different size,grades, specification & thickness as per the clients requirements.

Incoloy 825
Forms of Incoloy 825 available at UNIFIT METALLOYS INC

  • Sheet
  • Plate
  • Bar
  • Pipe & Tube (welded & seamless)
  • Fittings (i.e. flanges, slip-ons, blinds, weld-necks, lapjoints, long welding necks, socket welds, elbows, tees, stub-ends, returns, caps, crosses, reducers, and pipe nipples)
  • Wire

Characteristics of Incoloy 825

  • Excellent resistance to reducing and oxidizing acids
  • Good resistance to stress-corrosion cracking
  • Satisfactory resistance to localized attack like pitting and crevice corrosion
  • Very resistant to sulfuric and phosphoric acids
  • Good mechanical properties at both room and elevated temperatures up to approximately 1020° F
  • Permission for pressure-vessel use at wall temperatures up to 800°F

Alloy 825 (UNS N08825) Chemical Composition, %

Ni

Fe

Cr

Mb

Cu

Ti

C

Mn

S

Si

Al

38.0-46.0

22.0 min

19.5-23.5

2.5-3.5

1.5-3.0

.6-1.2

0.05 max

1.0 max

0.03 max

0.5 max

0.2 max

Applications of Incoloy 825

  • Chemical Processing
  • Pollution-control
  • Oil and gas well piping
  • Nuclear fuel reprocessing
  • Components in Pickling equipment like heating coils, tanks, baskets and chains
  • Acid production

ASTM Specifications

Pipe Smls

Pipe Welded

Tube Smls

Tube Welded

Sheet/Plate

Bar

Forging

Fitting

B423

 

 

 

B424

B425

B564

B366, B564

MECHANICAL PENDING

Alloy 825 has good mechanical properties from cryogenic temperatures to moderately high temperatures. However, exposure to temperatures above 1000° F can result in microstructural changes that significantly lower ductility and impact strength. Alloy 825 should not be used at temperatures where creep-rupture properties are design factors.

 

JoomShaper